Service manual

Laser Optics

SM 3-7 G165/G166/G167/G181/G183/G184

Replacement

Adjustment

3.4 LASER OPTICS

Before performing this procedure, please refer to Technical Service Bulletin –

G165/G166/G167/G181/G183/G184 – 026 Laser Optics Housing Replacement.

 Turn off the main power switch and unplug the printer before beginning any of the

procedures in this section. Laser beams can cause serious eye injury.

3.4.1 CAUTION DECAL LOCATIONS

Caution decals are attached as shown below.

 Be sure to turn off the main power switch and disconnect the power plug from the

power outlet before beginning any disassembly or adjustment of the laser unit.

This printer uses a class IIIb laser beam with a wavelength of 655 nm and an

output of 7 mW. The laser can cause serious eye injury.

⇒

Rev. 08/24/2009

CÓPIA NÃO CONTROLADA