Service manual

Image Transfer
SM 3-17 G165/G166/G167/G181/G183/G184
Replacement
Adjustment
3.6 IMAGE TRANSFER
3.6.1 IMAGE TRANSFER BELT UNIT
To simplify the procedure, remove the lower fusing entrance guide instead of the fusing unit
during image transfer belt removal.
1. Remove all the AIO cartridges ( AIO Cartridge).
2. Transfer unit ( Transfer Unit)
3. Remove the lower fusing entrance guide (1 hook).
4. Remove the waste toner bottle.
5. Remove the two screws [A].
Lower Fusing Entrance Guide
Hook
⇒
Rev. 08/2008
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA