Service manual

Image Transfer

SM 3-23 G165/G166/G167/G181/G183/G184

Replacement

Adjustment

3.6.6 TM (TONER MARK) SENSOR BASE

1. Open the top cover.

2. Remove all AIO cartridges ( AIO Cartridge).

3. Slide the ITB unit to the front side or remove it.

4. Rear cover ( Right Cover)

5. Controller box cover ( Controller Board)

6. MF models only: Controller bracket ( EGB)

7. Disconnect CN306 on the EGB (= x 1).

8. Harness cover [A] (hook)

9. TM sensor base [B]

CÓPIA NÃO CONTROLADA