Scanner User Manual

Understanding the Indicators

The scanner has the following indicators:

TH2H030E

1: Power On

2: Machine Busy

3: Document in Place

4: Error

When the scanner is in a normal operating state, the indicators will light in one of the combina-

tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p.

28, “Error Indicators and Solutions.”

Description

❍❍❍❍When the power has just been turned on, or the

Reset switch has been pressed (This combination

is displayed only for a few seconds.)

❍●●●When there is no document in the Auto Docu-

ment Feeder, and no document is being scanned

❍●❍●When there is a document in the Auto Document

Feeder, but the document is not being scanned

❍❍●●When scanned data is being transferred (and there

is no document in the ADF)

❍❍❍●When scanned data is being transferred (and there

is a document in the ADF)

❍●✕●When the scanner is ready for manual scanning

✕●●●When the scanner is ready by Low Power Mode

❍ :On

✕ : Flashing

● : Off

Guide to the Scanner