Operating Manual The serial number may be found on the bottom of the camera. Before You Begin Read this section before use. It covers the names of the parts and how to prepare the camera for use. First Steps Read this section before using your camera for the first time. It covers the basic operations for using your camera for the first time, including how to turn on the camera, take pictures, and play back images.
Checking the Contents of the Package Before using your digital camera, confirm that the package contains the items listed below. GR II Hot shoe cover (attached to camera) g g Power plug g g Rechargeable battery (DB‑65) USB power adapter (AC-U1) USB cable Hand strap CD-ROM Operating Manual (this manual) User Registration Thank you for purchasing a RICOH IMAGING product.
Introduction This Operating Manual provides information on how to use the shooting and playback functions of this camera and related precautions. Thoroughly read this Operating Manual to make the best use of the functions available with this camera. Be sure to keep this Operating Manual for future reference. RICOH IMAGING COMPANY, LTD. Safety precautions Read all safety precautions thoroughly to ensure safe use.
About the Wireless LAN Function • Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields and electromagnetic waves. • If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate. • If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur.
Announcement on the Use of BSD-Licensed Software This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc. Tera Term Copyright (c) T.
Safety Precautions Warning Symbols Various symbols are used throughout this Operating Manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. Danger This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled. Warning This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled.
n n n Do not charge the battery with a charger from another manufacturer. Also, do not use the battery with any camera except the cameras compatible with the DB-65. Discontinue use immediately in the event of abnormalities such as smoke, unusual odors, or excessive heat being emitted. Contact your nearest dealer or service center for repair.
n • • • • n n n n n n n n n n 6 Please observe the following in order to prevent fire, electrical shock or cracking of the battery while charging. Use only the indicated power supply voltage. Also avoid the use of multisocket adapters and extension cords. Do not damage, bundle or alter power cords. Also, do not place heavy objects on, stretch or bend power cords. Do not connect or disconnect the power plug with wet hands. Always grip the plug section when disconnecting a power plug.
n n n n n n n n n n n Do not connect or disconnect the power plug with wet hands. Both operations pose the risk of electric shock. Always grip the plug section when disconnecting a power plug. Do not pull the power cord. This can damage the power cord and result in fire or electric shock. If any metallic object, water, liquid or other foreign object gets into the camera, immediately remove the power plug from the outlet and contact a service center for repair.
n n n n n Safety Precautions for Accessories 8 Remove the power plug from the outlets before cleaning the equipment. Remove the power plug from the outlets when not in use. Do not cover equipment while charging, as this can result in fire. Do not short the terminals or metal contacts on the power cords, as this can result in fire. Do not use the equipment in wet areas or areas subject to oil smoke as this could result in fire or electric shock.
Contents Introduction............................................................................................................................. 1 Contents.................................................................................................................................... 9 Before You Begin 13 Parts of the Camera.............................................................................................................14 Using the Dials and Lever.........................................
Setting the White Balance................................................................................................67 Setting the Color Temperature..............................................................................70 Setting the White Balance Manually...................................................................70 Shooting Continuously......................................................................................................71 Shooting Continuously...........................
Correcting and Processing Images..............................................................................102 Reducing the Size of Images................................................................................102 Trimming Images.....................................................................................................102 Correcting Skewed Images...................................................................................103 Correcting Brightness and Contrast (Level Compensation).
5 Menus 145 [Shooting] Menu................................................................................................................145 [Playback] Menu.................................................................................................................149 [Key Custom Options] Menu.........................................................................................150 6 [Setup] Menu....................................................................................................
Before You Begin This section covers the names of the parts and how to prepare the camera for use. Parts of the Camera........................ 14 Using the Dials and Lever............. 16 Picture Display................................ 18 Getting Ready.................................
Parts of the Camera 1 2 3 4 5 6 7 15 8 Before You Begin 9 10 11 12 13 14 17 16 18 19 20 27 28 29 34 35 36 37 38 21 22 23 24 25 26 14 30 31 32 33
Up-down dial.............................................17 2 Mode dial lock release button....................16 3 Mode dial...................................................16 4 Shutter release button...............................32 5 POWER button...........................................27 6 Hot shoe...................................................167 7 Flash cover.................................................32 8 Strap eyelet 9 AF auxiliary light................................
Using the Dials and Lever Mode Dial You can change the shooting mode with the mode dial. Before You Begin While pressing the mode dial lock release button (1), turn the mode dial (2). Av: Aperture priority mode (p.42) Allows you to manually set the aperture value. The camera adjusts the shutter speed automatically. P: Program shift mode (p.42) Allows you to choose from combinations of aperture value and shutter speed. 5: Auto shooting mode (p.
Up-down Dial and ADJ. Lever Use the up-down dial and ADJ. lever in place of the !"#$ buttons and to set the exposure. (p.43) Up-down dial Before You Begin ADJ. lever Operation Up-down dial ADJ. lever Description Turn left or right Used in place of the !" buttons. Changes the aperture value and shutter speed. Press left or right Used in place of the #$ buttons. Changes the aperture value, shutter speed, and ISO sensitivity. Push in the middle Calls assigned function. (p.
Picture Display Shooting Screen 1 2 3 4 5 6 7 8 9 10 11 Before You Begin 12 13 14 15 37 17 18 30 31 32 33 34 35 36 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 18 11 17 Still image mode 3 39 19 20 21 22 23 24 25 26 27 28 29 16 1 2 38 Flash mode................................................79 Flash compensation/Manual flash amount ............................................................81, 82 Multiple exposure shooting/Interval shooting/Interval composite...................
Note-----------------------------------------------------------------------------------------------------------• The maximum number that can be displayed for the number of storable images is “9999”. Playback Screen 1 2 3 4 567 8 8 Before You Begin 9 10 11 12 13 14 15 Still image mode 1 2 3 4 5 6 7 8 Folder number-File number.....................126 Current file/Total files Wi-Fi connection........................................20 Battery level...............................................
Battery Level Indicator Icon Status Battery is fully charged. Battery is partially charged. Recharging the battery is recommended. Before You Begin Low battery. Recharge the battery. Wi-Fi Connection When using a Wi-Fi connection (p.132), the connection status is displayed in the shooting and playback mode screens.
Changing the Screen Display Shooting Mode Select from the following displays in shooting mode. Information display Grid guide Before You Begin Level indicator Histogram Graphic display Information display Note-----------------------------------------------------------------------------------------------------------• You can specify the information displayed each time the DISP. button is pressed in [DISP. Button Display Setting] of the [Setup] menu. (p.
Playback Mode Detailed information display No indicator display Highlight alert Before You Begin Normal indicator display Note-----------------------------------------------------------------------------------------------------------• The pages of the detailed information display can be switched using the !" buttons. • When [Highlight Alert] of the [Setup] menu is set to [On], the white saturation areas of the image flash in black in the highlight alert.
Getting Ready Prepare the camera for use. Inserting the Battery and a Memory Card SD memory cards, SDHC memory cards, and SDXC memory cards can be used with this camera. “Memory card” refers to these memory cards in this manual. 1 2 Slide the release lever on the bottom of the camera toward OPEN to open the battery/ card cover. Before You Begin Be sure that the camera is off before inserting or removing the battery and memory card.
Data Storage Location Images taken and movies recorded with this camera are saved in the internal memory or a memory card. When a memory card is not inserted in the camera, images and movies are saved in the internal memory. Caution-------------------------------------------------------------------------------------------------------Before You Begin 24 • Images and movies are not saved in the internal memory when a memory card is inserted, even if the memory card is full.
Charging the Battery Charge the rechargeable battery (DB-65) using the included USB cable and USB power adapter (AC-U1) with the included power plug before use. 1 Insert the power plug to the USB power adapter. Before You Begin Insert it until it clicks into place. 2 3 4 Open the terminal cover, and connect the USB cable to the USB/ AV OUT terminal. Connect the USB cable to the USB power adapter. Plug the USB power adapter into a power outlet. The autofocus/flash lamp turns on and charging starts.
Storage Capacity--------------------------------------------------------------------------------------------• Approximately 290 pictures can be taken when the battery is fully charged. • This is based on tests conducted according to CIPA standards under the following conditions: At 23°C (73°F) temperature; the picture display is on; a picture is taken every 30 seconds; the flash is fired every two pictures; the camera is turned off and back on after 10 pictures are taken.
Turning the Camera On and Off Press the POWER button to turn the camera on. The POWER button lamp lights, and then the autofocus/flash lamp blinks for several seconds. Turning the Camera On in Playback Mode When the 6 button is pressed and held with the camera turned off, the camera turns on in playback mode. Before You Begin When the POWER button is pressed again, the power turns off. When the camera is turned on in playback mode, you can perform the following operations.
Note-----------------------------------------------------------------------------------------------------------• To save the battery power, you can set the following functions in the [Setup] menu. Before You Begin Operation When the setting is disabled The camera will turn off automatically if no operations are performed during the set time. You can set this to [Off] or a certain number of minutes up to 30 minutes in increments of 1 minute. To resume operation, turn the camera on again.
Setting the Date and Time When the power is turned on for the first time, the [Date Settings] screen appears. 1 Set the year, month, day, hour, minute, and date format. 2 Press the MENU/OK button. 3 Press the MENU/OK button. Before You Begin Press #$ to select an item, and press !" to change the value. To cancel the setting, press the r button. A confirmation screen appears. The date is set.
30
First Steps Read this section before using your camera for the first time. Basic Shooting................................ 32 Playing Back Images...................... 38 Using the Menu...............................
Basic Shooting Now you are ready. Shooting with Auto Settings First Steps 1 2 3 Turn the mode dial to 5. Turn the mode dial while pressing the mode dial lock release button. To use the flash, slide the FOPEN switch down. The flash opens. The autofocus/flash lamp blinks while the flash charges. Once the flash is charged, the lamp turns off and the camera is ready to shoot. The flash will not fire when the flash cover is closed. Press the shutter release button halfway.
Focus----------------------------------------------------------------------------------------------------------• The autofocus/flash lamp and the frame color show whether the subject is in focus. Autofocus/flash lamp Focus status Frame color Autofocus/flash lamp Before focusing White *1 Off Subject in focus Green Green (on) Unable to focus Red (blinks) Green (blinks) First Steps Focus frame *1 The frame color is blue when a face is recognized in 5 mode or with [Effect] set to [Portrait].
Note------------------------------------------------------------------------------------------------------------ First Steps • In 5 mode, pictures are taken with the following settings. • ISO Setting [Auto-Hi] • Noise Reduction [Auto] • Exposure Metering [Multi] • Focus “Face recognition priority AF” • Auto Macro • White Balance [Multi-P AUTO] • Flash [Auto] The settings cannot be changed for the above functions. • Select [Off], [0.
Note-----------------------------------------------------------------------------------------------------------• The camera remains in self-timer mode even after shooting. To cancel the self-timer, change the selftimer setting to [Self-Timer Off] in Step 2. • When the self-timer is set to [Self-Timer 2 Sec], the AF auxiliary light does not light. • When [Custom Self-Timer] is set, set the following items in [Custom Self-Timer] of the [Shooting] menu.
Checking the Camera Level and Tilt This camera has a built-in level indicator that can be used to indicate the level and tilt of the camera on the picture display. You can check for the horizontal level and tilt in the forward-backward direction. First Steps The level is indicated by the tilt of the horizontal line, and the tilt in the forward-backward direction is indicated by the deviation of the horizontal line from the reference line.
Yellow Red When tilted too far or unable to measure tilt Note------------------------------------------------------------------------------------------------------------ First Steps When tilted forward • The indicators are displayed only when [Level Indicator] is set to [On] in [DISP. Button Display Setting] of the [Setup] menu. (p.125) • The indicators can also be set in [Level Setting] of the [Setup] menu.
Playing Back Images Images can be viewed on the picture display. Press the 6 button. 2 View the images. First Steps 1 The camera switches to playback mode and the last image you took is displayed. You can perform the following operations. # button Displays the previous image. Press and hold # button Fast-reverses playback. $ button Displays the next image. Press and hold $ button Fast-forwards playback.
Using the Menu 1 The menu appears. The menu that is displayed first varies depending on the mode when the button is pressed. To change the menu, press the # button, use the !" buttons to select a tab, and then press the $ button. First Steps 2 Press the MENU/OK button. Press the !" buttons to select an item. Pressing the X/Y button moves the cursor to the head of the menu delimiter (horizontal line). 3 4 5 Press the $ button. The options are displayed. Press the !" buttons to select an option.
40
Advanced Operations Read this section when you want to learn more about the different camera functions. 1 2 3 4 1 2 3 4 5 6 Various Shooting Functions..... 42 Playback Functions.................... 95 Changing Camera Settings....114 Making Use of Images.............130 Menus.........................................145 Appendices...............................
1 Various Shooting Functions Select a shooting mode to match the scene. Mode Purpose Page 5 For easy shooting p.32 1 P/Av/Tv/TAv/M For shooting with a set aperture value and shutter speed p.42 3 For recording movies p.92 Various Shooting Functions MY1/MY2/MY3 For shooting with your favorite settings p.117 Shooting with a Set Exposure Set an aperture value or shutter speed when shooting. The following values can be set.
1 The symbol for the selected shooting mode and the set value are displayed on the shooting screen. In M mode, the exposure indicator is displayed. 1 Turn the up-down dial or press the ADJ. lever left or right to change a value. The following values are changed. Mode P 3 Up-down dial Program Shift ADJ. lever — Av Aperture value — Tv Shutter speed — TAv/M Aperture value Shutter speed Various Shooting Functions 2 Set the mode dial to P/Av/Tv/TAv/M.
Note-----------------------------------------------------------------------------------------------------------• The functions for the up-down dial and ADJ. lever when in TAv and M modes can be switched in [M/ TAv Mode Dial Setting] of the [Key Custom Options] menu. • You can set whether to automatically adjust the exposure when the correct exposure cannot be obtained for the aperture value and shutter speed set in Av, Tv, and TAv modes in the [Shooting] menu.
Diagram 1: Normal Lv7 Lv8 Lv9 Lv10 Lv11 Lv12 Lv13 Lv14 Lv15 Lv16 Lv17 Lv18 Lv19 Lv20 Lv6 F16 Lv5 Lv4 Lv3 Lv2 Lv0 F16 F11 6 F8 5 F5.6 4 F4 F2.8 3 -3 8 -2 4 -1 2 0 1 1 1/2 2 1/4 3 1/8 4 1/15 5 1/30 6 1/60 F2.8 2 F2 1 F1.4 0 F1 7 8 9 10 11 12 1/125 1/250 1/500 1/1000 1/2000 1/4000 Diagram 2: Max Aperture Prior. Lv8 Lv9 1 Various Shooting Functions Lv1 8 7 Lv10 Lv11 Lv12 Lv13 Lv14 Lv15 Lv16 Lv17 Lv18 Lv19 Lv20 Lv6 F16 Lv5 Lv4 Lv3 Lv2 Lv1 8 F16 7 F11 6 F8 5 F5.
Bulb/Time----------------------------------------------------------------------------------------------------• You can select between B (Bulb) and T (Time) for the shutter speed in M mode. Shutter speed 1 Various Shooting Functions 46 Operation B The image continues to be exposed while the shutter release button is pressed. The exposure ends when the shutter release button is released. T The exposure begins when the shutter release button is pressed.
Slow Shutter Speed NR------------------------------------------------------------------------------------• Using a long shutter speed results in a noisy image. When [Slow Shutter Speed NR] of the [Shooting] menu is set to [On], noise reduction processing is carried out depending on the combination of the ISO sensitivity and shutter speed settings. However, it takes some time to save the processed image.
Using Exposure Compensation 1 Set a value using the X/Y button. 2 Press the MENU/OK button. 1 Settings can be made in the range from –4.0 EV to +4.0 EV (from –2.0 EV to +2.0 EV in 3 mode). You can also shoot while the [Exposure Compensation] screen is displayed. Various Shooting Functions The shooting screen reappears, and the setting is displayed on the screen.
Setting the ISO Sensitivity Set the ISO sensitivity in [ISO Setting/NR] of the [Shooting] menu. Auto In ISO 100 to ISO 800, the camera automatically adjusts sensitivity according to brightness, the distance to the subject, macro settings, and the format. ISO 100 to ISO 25600 Sensitivity is set to the selected ISO value.
Reducing Noise You can reduce the amount of noise in still images. 1 1 2 Various Shooting Functions 3 4 5 In the [Shooting] menu, select [ISO Setting/NR], and then press the $ button. The [ISO Setting/Noise Reduction] screen appears. Press the !" buttons to select [Noise Reduction], and then press the $ button. Press the !" buttons to select [Off], [Auto], or [Manual]. When [Off ] or [Auto] is selected, proceed to Step 5.
Dynamic Range Compensation With [Dynamic Range Compensation] of the [Shooting] menu, you can expand an image gradation to make the bright and dark portions of an image clearly visible. You can select from [Off ], [Auto], [Weak], [Medium], and [Strong]. When dynamic range compensation is set, a symbol appears on the screen. 1 • When dynamic range compensation is set, available ISO sensitivity is limited. Setting ISO Step Setting [1EV] Min. Max. ISO Step Setting [1/3EV] Min. Max.
Selecting a Metering Method Set the metering method in [Exposure Metering] of the [Shooting] menu. Multi 1 Center Various Shooting Functions Spot The camera meters exposure in 484 areas of the frame. (Default setting) The entire image is metered, with emphasis on the center, to determine the exposure value. Use this setting when the brightness of the center and surroundings are different. The center of the image is metered to determine the exposure value.
Using the ND Filter With [ND Filter] in the [Shooting] menu, you can set whether or not to always use the camera’s internal ND filter. Off The ND filter is not used. Auto The ND filter is used when the exposure is outside the linked range. The ND filter is used if the icon is displayed on the shooting screen when the shutter release button is pressed halfway. The ND filter is not used in P and M modes. On The ND filter is always used. The icon is displayed on the shooting screen.
Setting a Picture Format With [Picture Format] of the [Shooting] menu, you can set the picture format, size, and aspect ratio. Format/Size o: p: q: r: s: u: Aspect Ratio 3:2, 4:3, 1:1 1 Various Shooting Functions Records a q sized RAW image (DNG format). Records a RAW image simultaneously with a q sized JPEG image.
Crop-----------------------------------------------------------------------------------------------------------• If [Crop] of the [Shooting] menu is set to [35 mm] or [47 mm], the 35 mm equivalent angle of view is changed from default 28 mm to 35 mm or 47 mm, and the image display is also changed. • When [Crop] is set, available format and size are limited. Crop Format/Size limitation q cannot be used. 47 mm q and r cannot be used.
Setting the Focus Selecting a Focusing Method Set the focusing method in [Focus] of the [Shooting] menu. 1 Various Shooting Functions Multi AF Measures the distances from 9 AF areas and focuses to the nearest AF area. This prevents the center of the picture display from becoming out of focus and enables you to shoot with a minimum number of out-of-focus pictures. (Default setting) Spot AF Focuses on the area in the center of the frame. Pinpoint AF Subj.
Note------------------------------------------------------------------------------------------------------------ Caution-------------------------------------------------------------------------------------------------------• In [Subj. Tracking], the following functions are not available.
Focusing Manually (Manual Focus) If the camera fails to focus automatically, you can focus manually. The manual focus enables shooting at a fixed distance. 1 In [Focus] of the [Shooting] menu, select [MF]. 2 Press the ! button. 1 Various Shooting Functions 3 The symbol and focus bar appear in the shooting screen. In P, Av, TAv, and M modes, and when using Interval Composite, a depth of field approximation appears. $ appears on the focus bar. Use the up-down dial to adjust the focus.
Shooting Close-ups (Macro Mode) You can approach the subject up to 10 cm (shooting range: approx. 12 × 8 cm) away from the front edge of the lens to shoot. 1 Press the N (!) button in shooting mode. N appears on the shooting screen. Shoot. To cancel macro mode, press the N button again. Various Shooting Functions 2 1 Note-----------------------------------------------------------------------------------------------------------• [Focus] operates as [Spot AF] or [Pinpoint AF].
Using the AF Button When the AF button is used, AE lock or AF lock is available in place of pressing the shutter release button halfway. You can use the AF function switching lever to AF function switchswitch the AF button function. ing lever 1 Various Shooting Functions AF button When the AF Function Switching Lever is Set to AEL/AFL The AF button operation can be selected from [Off ], [Multi AF], [Spot AF], or [Pinpoint AF] in [AFL Focus Settings] of the [Key Custom Options] menu.
Note-----------------------------------------------------------------------------------------------------------• In [AEL/AFL Lock keep Setting] of the [Key Custom Options] menu, you can set whether or not to maintain the lock even when you release the AF button. Off Locks the focus only while the button is pressed. On Locks the focus when the button is pressed, and cancels the focus when the button is pressed again.
When the AF Function Switching Lever is Set to C-AF While the AF button is pressed, “Continuous AF” which continuously focuses on the subject will be active, regardless of the [Focus] setting. Note------------------------------------------------------------------------------------------------------------ 1 • A green frame appears when the camera has finished focusing. The focus sound is not played.
Setting Focus Assist and AE/AF Target Without moving the camera you can meter a specific spot on the subject using buttons only, and activate the focus lock. This function is useful for shooting on a tripod. 1 The target setting screen appears. Set the target position and size. The following operations are available. !"#$ buttons Moves the target. Up-down dial Portion magnification: Changes the display area.
3 1 For detailed settings, press the Fn2 button. The following settings are available. Various Shooting Functions 4 Move Target Setting Specifies the target to move from [AE·AF], [AF], and [AE] (from [AE·MF], [MF], and [AE] when [Focus] is set to [MF]). Focus Assist Setting Intensifies the outlines and contrast inside the area, making it easier to adjust the focus. [MODE 1] Emphasizes edges. [MODE 2] Emphasizes outlines. [MODE 3] Inverts black and white for MODE 1.
Caution-------------------------------------------------------------------------------------------------------• [FA/Move Target] cannot be set in the following cases. • In 5 and 3 modes • When the focus is set to [Subj. Tracking] • When [Magnification Setting] is set to [Magnify whole], [One Press M Mode] is not available. Note------------------------------------------------------------------------------------------------------------ 1 Various Shooting Functions • If [Focus] is changed to [Subj.
Shooting with a Single Press of the Shutter Release Button (Full Press Snap) While pressing the shutter release button halfway operates AF, pressing the shutter release button fully quickly performs shooting at the set focal distance. This function is called “Full Press Snap”. The camera focuses at the distance set in [Snap Focus Distance] of the [Shooting] menu (p.58). 1 Set [Full Press Snap] of the [Shooting] menu. Various Shooting Functions Off Operates the same way as AF.
Setting the White Balance Make adjustments to the white balance so that white subjects will appear white under any kind of light. If the white balance is not how you thought it would be when shooting an object of a single color or when shooting under multiple light sources, change the setting. Auto Multi-P AUTO Automatically optimizes the white balance to match each of the separate areas of light even when multiple light sources are mixed together, such as sunlight/ shade and flash.
Used with warm white fluorescent lighting. Warm White Fl. CTE Exaggerates the color of the light source to leave the color of the subject. Use this setting when you want to emphasize the color used for most part of the image. Specifies the color temperature. (p.70) 1 CT (color temperature) Various Shooting Functions Adjusts the white balance manually. (p.70) Manual 1 2 Press the WB (") button in shooting mode. The [White Balance] screen appears. Press the !" buttons to select the setting.
6 Press the MENU/OK button. The shooting screen reappears and the symbol is displayed on the screen. Note------------------------------------------------------------------------------------------------------------ Caution-------------------------------------------------------------------------------------------------------• The white balance may not be adjusted correctly for a subject that is mostly dark. • When using a flash, set the white balance to [Auto], [Multi-P AUTO], or [Manual].
Setting the Color Temperature 1 Select [CT] in Step 2 on p.68, and then press the Fn2 button. 2 Press the !" buttons to set a value. 3 Press the MENU/OK button. 4 Press the MENU/OK button. 1 The [White Balance Detailed Settings [CT]] screen appears. Various Shooting Functions Values from 2500 K to 10000 K can be set. If the Fn2 button is pressed, the white balance compensation can be performed. If the Fn2 button is pressed again, the screen returns to the color temperature settings.
Shooting Continuously The continuous shooting functions are as follows. Continues to take pictures for as long as you hold down the shutter p.72 release button. Auto Bracket Takes three images with different exposure, white balance, effect, p.73 dynamic range, or contrast settings. Multiple Exposure Shooting Merges multiple images together. p.74 Interval Shooting Take pictures automatically at a fixed interval. p.
Shooting Continuously Set [Continuous Mode] of the [Shooting] menu to [Continuous] to perform continuous shooting. Pictures continue to be taken for as long as you hold down the shutter release button. The autofocus is fixed in the first frame. 1 When [Continuous] is set, the symbol appears on the shooting screen. Various Shooting Functions Set [Continuous Mode] to [Off ] to return to normal shooting.
Shooting Continuously with Different Settings (Auto Bracket) In the [Auto Bracket] settings in the [Shooting] menu, three images will be taken with differing values for exposure, white balance, etc. AE-BKT 1/3EV AE-BKT 1/2EV Takes three images (an image with more reddish than the current white balance, an image at the current white balance, and an image with more bluish than the current white balance). Takes three images with different white balance settings.
Shooting Continuously with Varied Exposure Values 1 1 2 Various Shooting Functions 3 In [Auto Bracket] of the [Shooting] menu, select [AE-BKT 1/3EV] or [AE-BKT 1/2EV], and then press the $ button. The [AE Bracketing Settings] screen appears. Press the #$ buttons to select from the first through third image, and then press the !" buttons to set the exposure value. Press the MENU/OK button twice. The shooting screen reappears.
Automatic Exposure [Off]: Does not adjust the exposure value. [On]: Merges images while adjusting the exposure value depending on the number of images. Save Each Image [Off]: Saves only the final merged image. [On]: Saves each unmerged image. Save in process [Off]: Saves only the final merged image. [On]: Saves each merged image. 4 5 Press the MENU/OK button. [Multiple Exposure Shooting] appears on the shooting screen. Take the first image.
Shooting Automatically at Set Intervals (Interval Shooting) The camera takes pictures automatically at fixed intervals. 1 1 Various Shooting Functions 2 In the [Shooting] menu, select [Interval Shooting], and then press the $ button. The [Interval Shooting] screen appears. Press the #$ buttons to select minutes/seconds, and then press the !" buttons to set the interval value. You can select the shooting interval from 1 second, 2 seconds, or between 5 seconds and 60 minutes (in 5-second increments).
Recording Star Trails (Interval Composite) A series of continuous images taken at set intervals is merged in such a way that the bright areas remain. Use this function when you want to record the trails of light formed by stars or the moon during nightscape shooting at a fixed position. 3 4 Mount the camera on a tripod. Set the mode dial to Av, Tv, TAv, or M, and then take a test shot. Set the aperture value, shutter speed, focus, ISO sensitivity, and white balance, and then check the composition.
1 6 Press the shutter release button fully. 7 Press the MENU/OK button to end shooting. The first image is taken, and additional images are taken continuously at the set interval. To check the images being merged, press the shutter release button halfway. If the shutter release button is pressed fully, the images merged up to that point are saved as they are, and the interval composite shooting starts with a new image. Various Shooting Functions The merged image is saved.
Using the Flash Setting the Flash Mode Auto Automatically fires the flash when the subject is poorly lit or backlit. (Default setting) Always fires the flash. Flash Synchro. Manual Flash Fires the flash with the shutter speed slowed. Use when taking nightscape pictures that include people. Use of a tripod is recommended to prevent blur. Fires the flash with intensity set in [Manual Flash Amount] of the [Shooting] menu. (p.82) Reduces “red-eye” in portraits taken with the flash.
2 1 Various Shooting Functions 3 Press the F ($) button. The flash mode setting screen appears. Press the #$ buttons to change the flash mode. The symbol appears on the shooting screen. Note-----------------------------------------------------------------------------------------------------------• If the ISO sensitivity is set to [Auto], the range the flash light will reach is approximately 20 cm to 3.0 m from the front edge of the lens. • The flash fires a pre-flash to increase the AE accuracy.
Adjusting the Intensity of the Flash The intensity of the flash can be adjusted. 1 In the [Shooting] menu, select [Flash Exposure Compensation], and then press the $ button. The [Flash Exposure Compensation] screen appears. Press the X/Y button to set a value. 3 Press the MENU/OK button. The intensity can be set in the range from –2.0 EV to +2.0 EV in increments of 1/3 EV. The set value appears on the shooting screen.
Setting the Flash Intensity for Manual Flash The intensity of the internal flash can be set for when the flash mode is set to [Manual Flash]. 1 1 2 Various Shooting Functions 3 In the [Shooting] menu, select [Manual Flash Amount], and then press the $ button. Press the !" buttons to select a value. You can select from the following fractions of the maximum flash intensity: [Full], [1/1.4], [1/2], [1/2.8], [1/4], [1/5.6], [1/8], [1/11], [1/16], [1/22], [1/32], and [1/64]. Press the MENU/OK button.
Taking Images with Unique Atmosphere Images with varied saturation and contrast can be taken. Effect The settings such as the hue can be changed to take distinctive images. B&W (TE) Hi-Contrast B&W Cross Process Positive Film Bleach Bypass Adds tint to black-and-white images. The [Toning Effect], [Saturation], [Contrast], [Sharpness], and [Vignetting] can be set. Takes images with stronger contrast than [Black & White].
Takes images finished like a painting with enhanced fine contrast. The [Toning Effect], [Saturation], and [Vignetting] can be set. HDR Tone Takes images with enhanced subject texture and surface details. The [Toning Effect], [Clarity], [Saturation], and [Vignetting] can be set. Clarity 1 Brilliance Various Shooting Functions Takes slightly colored images. The [Saturation], [Contrast], [Sharpness], and [Vignetting] can be set. Slight Takes images with quaint and vibrant shades of color.
1 2 3 4 Press the !" buttons to select the setting. Press the Fn2 button. Press the !" buttons to select the item, and then press the #$ buttons to set the value. Press the MENU/OK button twice. The symbol appears on the shooting screen. 1 Various Shooting Functions 5 In the [Shooting] menu, select [Effect], and then press the $ button.
Caution-------------------------------------------------------------------------------------------------------• • • • • If [Effect] is set, the settings for [Image Settings] are invalid. [Vignetting] cannot be set in 3 mode. If [Interval Composite] is set in the [Shooting] menu, [Vignetting] is invalid. Settings made in [Effect] are not applied to RAW images. [Effect] cannot be used with the following functions.
Shooting with Miniaturize Images that give the impression that they are close-ups of a miniature can be taken. This mode is effective when shooting from a high vantage point while looking down at a diagonal angle. 1 In [Effect] of the [Shooting] menu, select [Miniaturize]. 2 Press the MENU/OK button. 3 Press the Fn2 button. The miniaturize shooting screen appears. The areas outside of the unblurred (focus area) are shown in a semi-transparent gray.
Image Settings Images can be taken with adjusted saturation, contrast, sharpness, and vignetting. Vivid 1 Takes images with normal image quality. Various Shooting Functions Standard The [Saturation], [Contrast], [Sharpness], and [Vignetting] can be set. Setting1/Setting2 1 2 3 4 88 Increases the contrast, sharpness, and saturation beyond [Standard] for an image quality that feels solid. In the [Shooting] menu, select [Image Settings], and then press the $ button.
Caution-------------------------------------------------------------------------------------------------------• Settings made in [Image Settings] are not applied to RAW images. • If [Interval Composite] is set in the [Shooting] menu, [Vignetting] is invalid. Note-----------------------------------------------------------------------------------------------------------• In the [Key Custom Options] menu, [Image Settings] can be registered to use to the ADJ. lever and the Fn1, Fn2, and Effect buttons. (p.
Other Shooting Functions Adding the Date to Still Images 1 Various Shooting Functions 90 If [Date] or [Date and Time] is selected in [Date Imprint] of the [Shooting] menu, either the date (Year/Month/Day) or the date and time (Year/Month/ Day Hour:Minute) is imprinted on the lower-right corner of still images. The symbol appears on the shooting screen when [Date Imprint] is on.
Recording Movies Movies with sound can be recorded. Movies are recorded as MOV files. Setting the Movie Format 1 Turn the mode dial to 3. 2 Press the MENU/OK button. The mode switches to 3 mode. Various Shooting Functions 3 4 1 The [Shooting] menu of the 3 mode appears. Select [Movie Format], and then press the $ button. Press the !"#$ buttons to select [Still Image Size] or [Frame Rate]. The following settings are available.
Recording Movies 1 2 1 Various Shooting Functions 3 Turn the mode dial to 3. Press the shutter release button. Movie recording starts. While recording, the “REC” indicator, recording time, and time remaining are displayed. Press the shutter release button again. Recording ends. Caution-------------------------------------------------------------------------------------------------------• If the camera is operated while shooting, the operation sounds are also recorded.
Playing Back Movies 1 2 Press the 6 button. The mode switches to playback mode. Press the #$ buttons to select a movie. 3 Press the ! button. Playback starts. The progress indicator and elapsed time are displayed. 1 Various Shooting Functions Movies are indicated by 3 icon. The first frame of the movie is displayed as a still image. You can perform the following operations. ! button Pauses and resumes playback. " button Stops playback. X/Y button Adjusts the volume.
Clipping Movies The unnecessary parts at the beginning or end of a movie can be deleted, and the movie can be saved as a new file. 1 1 Various Shooting Functions 2 3 4 5 94 Display the movie to be edited in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [Clip Movie File], and then press the $ button. The [Clip Movie File] screen appears. Press the ADJ. lever to select either the beginning or the end of the movie.
2 Playback Functions Displaying Images in Thumbnail View Pressing the 8 (X)/9 (Y) button in playback mode displays multiple images in thumbnail view. 20-image view 81-image view 2 !"#$ buttons Selects an image. ADJ. lever Displays the selected image in single image view. DISP. button Changes between single image selection and page selection. Playback Functions In thumbnail view, you can perform the following operations.
Displaying Images in Enlarged View You can display still images enlarged. 2 In single image view, you can perform the following operations. Playback Functions 8 (X) button/ Up-down dial to the right Enlarges the image. 9 (Y) button/ Up-down dial to the left In enlarged view: Reduces the image. !"#$ buttons In enlarged view: Moves the enlarged area. Pushing down the ADJ.
Organizing Files Deleting Files Deleting One File 1 2 3 Press the D button. Press the !" buttons to select [Delete One]. You can change the image with the #$ buttons. For images taken with p, [Delete RAW+JPEG], [Delete JPEG Only], and [Delete RAW Only] can be selected. Press the MENU/OK button. 2 Playback Functions 4 Display the image to delete in playback mode. The image is deleted. To delete another image, repeat Steps 3 and 4. To end the process, select [Cancel].
2 3 4 2 Playback Functions 5 6 7 Select [Delete Multi], and then press the MENU/OK button. Select [Sel. Indiv.] or [Sel. Range], and then press the MENU/OK button. Press the !"#$ buttons to select images, and then press the MENU/OK button. The trash symbol is displayed in the bottom left corner of the thumbnail. If [Sel. Range] is selected, select the image that is the starting point of the range. If the ADJ. lever is pressed, the selection screen in Step 3 reappears. If [Sel. Indiv.
Setting Protection You can protect images to prevent them from being deleted accidentally. Caution-------------------------------------------------------------------------------------------------------• If you select [Format] in the [Setup] menu, protected images are also deleted. Setting Protection for One File 1 The [Playback] menu appears. Select [Protect], and then press the $ button. Press the !" buttons to select [1 File]. You can change the image with the #$ buttons.
Setting Protection for Multiple Files Simultaneously 1 2 3 2 4 Playback Functions 5 6 100 Select [Protect] in the [Playback] menu, and then press the $ button. When in 20-image or 81-image view, proceed to Step 3. Select [Sel. Multiple], and then press the MENU/OK button. Select [Sel. Indiv.] or [Sel. Range], and then press the MENU/OK button. Press the !"#$ buttons to select images, and then press the MENU/OK button. The protection symbol is displayed in the top right corner of the thumbnail.
Copying the Images and Movies in the Internal Memory to a Memory Card You can copy the still images and movies stored in the internal memory to a memory card. 1 2 Insert a memory card. Select [Copy to Card from Internal Memory] in the [Playback] menu, and then press the $ button. A message appears to indicate processing is being performed, and then the previous screen reappears when copying is complete.
Correcting and Processing Images You can correct and process taken images and then save them as new images. Caution-------------------------------------------------------------------------------------------------------• Only JPEG images taken with this camera can be corrected and processed. RAW images, movies, and still images saved from movies cannot be corrected and processed. • If you correct and process images repeatedly, image quality will deteriorate.
Note-----------------------------------------------------------------------------------------------------------• The image size after trimming differs depending on the size of the original image and the size of the trimming frame. Correcting Skewed Images You can correct images of rectangular objects such as message boards and business cards taken at an angle so that the images appear as if they were taken from the front. 1 3 The [Playback] menu appears.
Correcting Brightness and Contrast (Level Compensation) You can correct the brightness and contrast of taken still images. 1 2 2 3 Playback Functions 4 5 6 104 Display the image to correct in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [Level Compensation], and then press the $ button. Select [Auto] or [Manual], and then press the $ button. The original image is displayed on the top left, and the corrected image on the right.
Examples of Correction------------------------------------------------------------------------------------Adjusting the Overall Brightness • Move the mid-point to the left to increase the overall brightness, and move it to the right to increase the overall darkness. Correcting an Overexposed or Underexposed Image • If the image is overexposed, move the left side point to the right until it lines up with the left edge of the histogram.
Correcting the White Balance You can correct the color tones of still images. 1 2 2 Playback Functions 3 4 106 Display the image to correct in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [White Balance Compensation], and then press the $ button. The [White Balance Compensation] screen appears. Press the !"#$ buttons to make point adjustments. To reset the white balance, press the r button. If the r button is pressed again, the compensation is canceled.
Correcting Color Moire You can reduce color interference caused by regular overlapping patterns in still images. 1 2 3 Display the image to correct in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [Color Moire Correction], and then press the $ button. A message appears to indicate processing is being performed, and then the corrected image is saved as a new image.
Developing RAW Images You can convert RAW images into JPEG format and then save them as new files. The white balance and effect can be configured before saving the files. 1 2 2 Playback Functions 3 Display a RAW image in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [RAW Development], and then press the $ button. The [RAW Development] screen appears. Press the !" buttons to select a parameter, and then press the $ button. The following settings are available.
Note-----------------------------------------------------------------------------------------------------------• [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shooting. • For [Dynamic Range Compensation] and [Noise Reduction], select from [Off], [Weak], [Medium], and [Strong]. • For [Aspect Ratio], the images taken when [Picture Format] is set to [3:2] can be selected.
Viewing Images with an AV Device You can connect the camera to a TV or other AV device to play back images on the device. Purchase an optional cable that is compatible with the video input terminal(s) of the device to be connected. AV device terminal 2 Cable Camera terminal Video terminal AV cable (AV-1) USB/AV OUT terminal HDMI terminal HDMI cable (HC-1) HDMI micro output terminal Playback Functions 1 2 3 Connect the cable to the video input terminal of the AV device.
Note-----------------------------------------------------------------------------------------------------------• When connecting with an AV cable, confirm the video format of the AV device. The default video format setting of the camera varies depending on the country or region where you purchased it. To change the video format setting, set in [Video Out Mode] of the [Setup] menu. • The view switches to single image view when an HDMI cable is connected or disconnected.
Setting DPOF You can order prints of the still images stored on the memory card at a store with a print service. 1 2 Playback Functions 112 2 3 4 Display the image to set in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [DPOF], and then press the $ button. Use the !" buttons to select [1 File] or [Select All]. If [1 File] is selected, use the #$ buttons to select an image. Selecting [Cancel All] cancels the DPOF setting for all images. Press the MENU/OK button.
Setting DPOF for Multiple Still Images You can specify multiple images and the number of copies from thumbnail view. 1 2 3 The screen changes to 20-image view. Select [DPOF] in the [Playback] menu, and then press the $ button. Press the #$ buttons to select an image to print, and then use the !" buttons to specify the number of copies. The symbol indicating the DPOF setting appears. To cancel the setting, specify [0] for the number of copies. 2 Playback Functions 4 Press the Y button in playback mode.
3 Changing Camera Settings Customizing the Camera You can change the functions of the Fn buttons and ADJ. lever, and register settings to MY1, MY2, and MY3 of the mode dial. Registering Shooting Settings (My Settings) You can register the current camera settings as “My Settings” so that you can easily recall the desired settings for shooting. Settings can be registered to the following. 3 Changing Camera Settings MY 1, MY 2, MY 3 Settings can be registered to MY1, MY2, and MY3 of the mode dial.
1 2 3 Set the functions to register. Select [Reg. My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Reg. My Settings] screen appears. Select the location to register the settings, and then press the MENU/ OK button. If you select [MY 1], [MY 2], or [MY 3], the settings are registered to the mode dial. If you select a location that already has a name, the name setting screen appears. If you select [Yes], the settings are registered under the current name.
Recalling Settings Registered as My Settings You can assign the settings registered to [My Settings Box] to MY1, MY2, and MY3 of the mode dial. 1 2 Select [Recall My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Recall My Settings] screen appears. Press the !" buttons to select the location on the dial to assign the settings, and then press the $ button.
Shooting Images in My Settings Mode 1 Turn the mode dial to MY1, MY2, or MY3. Shooting becomes possible with the settings of “My Settings”. 3 To temporarily change the shooting mode, select [Switch Shooting Mode] in the [Shooting] menu.
Editing “My Settings” You can edit the settings registered as “My Settings”. 1 2 3 Changing Camera Settings 118 3 Select [Edit My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Edit My Settings] screen appears. Select the “My Settings” item you want to edit, and then press the $ button. To edit a “My Settings” item saved to My Settings Box, select [My Settings Box] and press the $ button to select a number. A list of settings appears.
Changing the Name of a “My Settings” Item 1 Select [Name] on the screen of Step 3 on p.118, and then press the $ button. The [Name] screen appears and the current name is displayed in the text input area. If you want to specify a new name, proceed to Step 3. 3 4 5 Character selection area Press the #$ buttons to move the cursor to the position you want to edit. Press the " button. The cursor moves to the character selection area.
Note-----------------------------------------------------------------------------------------------------------• If the settings of [MY 1], [MY 2], and [MY 3] are assigned in [Recall My Settings] and the settings of My Settings Box are edited, the changes are also applied to the settings of [MY 1], [MY 2], and [MY 3]. If the settings of [MY 1], [MY 2], and [MY 3] are directly edited, the changes are not applied to the settings of My Settings Box.
1 2 3 Select [ADJ. Lever Setting] in the [Key Custom Options] menu, and then press the $ button. The [ADJ. Lever Setting] screen appears. Press the !" buttons to select any of [ADJ. Lever Setting 1] to [ADJ. Lever Setting 5], and then press the $ button. Press the !" buttons to select the function to register, and then press the # button. Repeat Steps 2 and 3. 3 Press the MENU/OK button. The [Key Custom Options] menu reappears. Using ADJ. Mode 1 2 Press the ADJ. lever in shooting mode.
Registering Functions to the Fn1, Fn2, and Effect Buttons You can register functions to the Fn1, Fn2, and Effect buttons so that you can change settings or display a function setting screen by simply pressing these buttons. Any of the following functions can be registered to each of the Fn1, Fn2, and Effect buttons. Function 3 Changing Camera Settings — 28/35 mm 28/35/47 mm p.55 MultiAF/SpotAF MultiAF/PinpointAF AF/MF AF/Snap AF/Subj.Trckng p.56 JPEG>RAW JPEG>RAW+ p.54 ND Filter p.
1 2 Select [Set Fn1 Button], [Set Fn2 Button], or [Effect Button Setting] in the [Key Custom Options] menu, and then press the $ button. Press the !" buttons to select the function to register, and then press the # button. The function is registered, and then the [Key Custom Options] menu reappears.
Changing Other Settings Adjusting the Brightness of the Picture Display You can adjust the brightness of the picture display. The default setting is [Auto]. The brightness of the picture display is automatically adjusted depending on ambient brightness. 1 2 3 Changing Camera Settings 3 4 5 124 Select [LCD Brightness] in the [Setup] menu, and then press the $ button. Select [Auto] or [Manual]. When [Auto] is selected, press the MENU/OK button to return to the shooting screen.
Setting the Information Displayed in Shooting Mode You can set the information displayed for each number of presses of the DISP. button in shooting mode. 1 2 Select [DISP. Button Display Setting] in the [Setup] menu, and then press the $ button. The [DISP. Button Display Setting] screen appears. Press the #$ buttons to set [Use DISP. Screen]. O1 to O3 indicate the number of button presses, and OOFF indicates that the picture display is off. 4 5 Press the ADJ. lever to enable or disable a setting.
Setting the Operation Sounds You can set the camera operation sounds in [Operation Sounds] and [Volume Settings] of the [Setup] menu. There are the following four camera operation sounds. Shutter sound Played when the shutter release button is pressed. Focus sound Played when the shutter release button is pressed halfway and the subject is focused. Wi-Fi function sound Played when the w button is pressed and held and the Wi-Fi function is turned on or off.
Selecting the Folder Name You can select the folder name in [Folder Name Setting] of the [Setup] menu. Serial Number 100 to 999 Shooting Date ***_MMDD (3-digit folder number_Date) Changing the File Name You can change the first two characters of file names from “R0”. 1 2 Select [Change File Name] in the [Setup] menu, and then press the $ button. The [Change File Name] screen appears. Press the !" buttons to select a character.
Setting the Serial Number of Files For file names, a 6-digit serial number (000001 to 999999) is assigned after “R0”. In [Card Sequence No.] of the [Setup] menu, you can set whether to use the serial number continuously from the previous memory card when memory cards are replaced. On Uses the serial number continuously from the previous memory card even after memory cards are replaced. Off Starts from “R0**0001” after memory cards are replaced. Turn off and back on the power to reflect the setting.
Setting the Copyright Notice You can set a copyright notice to be written as Exif data when images are taken. 1 2 Select [Copyright Notice] in the [Setup] menu, and then press the $ button. The [Copyright Notice] screen appears. Press the " button. The cursor moves to the character selection area. 3 4 Press the !"#$ buttons to select a character, and then press the MENU/OK button. You can enter up to 46 alphanumeric characters. The character type can be changed with the Fn2 button. Press the ADJ.
4 Making Use of Images Using Images on a Computer You can transfer taken still images and recorded movies to a computer by connecting the camera to a computer with a USB cable. You can also use the “Digital Camera Utility 5” software supplied with the camera to convert RAW images. The following are the computer system requirements for connecting the camera to a computer and using the supplied software. Windows 4 Making Use of Images OS Windows 8.
Saving Images to a Computer Use the supplied USB cable to connect the camera to a computer. 1 2 5 Open the terminal cover, and connect one end of the USB cable to the USB/ AV OUT terminal on the camera and the other end to the computer. The camera turns on and “Connecting to PC…” appears on the picture display. The camera is recognized by the computer as a removable disk. The files on the memory card are displayed when a memory card is inserted.
Operating the Camera with a Communication Device The images saved in the camera can be displayed on/imported to a communication device by directly connecting both the devices via Wi-Fi and using the dedicated application “Image Sync”. Image Sync supports iOS and Android. It can be downloaded from the App Store or Google Play Store. For supported OS and other details, refer to the download site.
Caution-------------------------------------------------------------------------------------------------------• Do not attempt to use the Wi-Fi function in a location where the use of wireless LAN devices is restricted or prohibited, such as on airplanes. • When using the Wi-Fi function, please observe local laws and regulations governing radio communication. • If a memory card with a built-in wireless LAN function (such as an Eye-Fi card) is used, radio wave interference may occur.
Pressing and Holding the w Button 1 4 Set [Effect Button Hold Setting] to [Wi-Fi] in the [Key Custom Options] menu. The default setting is [Wi-Fi]. 2 Press and hold the w button. 3 Release the w button. A beep sounds and the Wi-Fi symbol appears on the shooting screen. To disable the Wi-Fi function, press and hold the w button again.
Pressing and Holding the 6 Button The Wi-Fi function can be enabled in playback mode from the power-off state of the camera. 1 Press and hold the 6 button until a beep sounds. The camera is turned on in playback mode and the Wi-Fi function is enabled. Caution-------------------------------------------------------------------------------------------------------• When the Wi-Fi function is enabled using the 6 button, the camera is not switched to shooting mode even if the shutter release button is pressed.
Operating the Camera with a Communication Device Connecting the Camera and Communication Device Connect the camera and communication device via Wi-Fi, and start Image Sync installed on the communication device. See “Enabling the Wi-Fi Function” (p.132) to enable the Wi-Fi function of the camera. When an NFC-compatible Device is Used 1 2 4 Lightly touch the communication device to the NFC mark of the camera.
3 Tap [RICOH_xxxxxx] in the [Network List]. The [Enter Password] screen appears. 4 Enter the password, and tap [Connect]. 4 Making Use of Images A Wi-Fi connection is established between the camera and communication device. The list of images appears on the Image Sync screen. Note-----------------------------------------------------------------------------------------------------------• You can check the default password in [Wi-Fi Information] of the [Setup] menu. (p.
When an iOS Device is Used 1 Set the wireless LAN (Wi-Fi) function to ON on the communication device. Tap [RICOH_xxxxxx] in the list of detected Wi-Fi networks. 2 Enter the password, and tap [Join]. 3 Start Image Sync on the communication device. A Wi-Fi connection is established between the camera and communication device. 4 Making Use of Images 138 The list of images appears on the Image Sync screen.
Viewing Images You can view the images saved either in the camera or in the communication device using Image Sync. 1 2 3 4 5 6 * Multiple image selection button 2 Album selector button (available for the application image list only) 3 Settings (p.143) 4 NFC connection screen 5 Images in the camera 6 Images in the communication device * This icon cannot be selected. Making Use of Images 1 4 Tap the image to display the full-screen image and shooting information.
Selecting the Image Storage Location When viewing images in application image list display, you can select the image storage location (album) from [Application] or [Gallery] (or [Camera Roll]). 1 Tap l. 2 Select the album. 4 Making Use of Images 140 The images in the selected album are displayed.
Selecting Multiple Images Tap m. 2 Tap the images to select. 3 Touch and hold one of the selected images. Blue check marks appear.
4 Select the desired action. Note------------------------------------------------------------------------------------------------------------ 4 Making Use of Images 142 • When you touch and hold the desired image shown in the list display, the same screen as Step 4 appears and you can select the action to apply.
Changing the Settings 1 Tap n. 2 Camera Power Off Turns off the power of the camera. General Settings Changes the communication settings and the display language. 4 Making Use of Images The [Settings] screen appears. The following settings are available. Tap [General Settings] if you change the communication settings and the display language.
3 4 Making Use of Images 144 4 Tap the setting item to be changed. Communication Settings The password and wireless channel can be changed. Device Information The application version, camera model, SSID, MAC address, and wireless channel can be checked. Language English or Japanese can be selected. Change the settings and tap k twice.
5 Menus The camera functions are mainly set with the menus. The following menus are available. (The underlined settings are the default settings.) [Shooting] Menu Use this menu to set the shooting settings. This menu is displayed in shooting mode. The options that can be selected vary depending on the position of the mode dial. Menu option Settings Page Multi AF, Spot AF, Pinpoint AF, Subj. Tracking, MF, Snap, ∞ p.56 Snap Focus Distance 1m, 1.5m, 2m, 2.5m, 5m, ∞ p.
Menu option Page Format/Size: o, p, q , r, s, u Aspect Ratio: 3:2, 4:3, 1:1 Movie Format*1 Still Image Size: w, x, n p.91 Frame Rate: 60 Frames/Sec, 50 Frames/Sec, 30 Frames/Sec, 25 Frames/Sec, 24 Frames/Sec Effect Off, Black & White, B&W (TE), Hi-Contrast B&W, Cross Process, p.83 Positive Film, Bleach Bypass, Retro, Miniaturize, Shift Crop, High Key, HDR Tone, Clarity, Brilliance, Slight, Vibrant, Bright, Portrait p.
Menu option Settings Page White Balance Auto, Multi-P AUTO, Outdoors, Shade, Cloudy, Incandescent p.67 1, Incandescent 2, Daylight Fl., Neutral White Fl., Cool White Fl., Warm White Fl., CTE, CT, Manual ISO Setting/NR ISO Setting: Auto, Auto-Hi, ISO 100 to ISO 25600 Noise Reduction: Off, Auto, Manual p.49 Exposure Compensation -4.0 to +4.0 p.48 ND Filter Off , Auto, On p.53 Dynamic Range Compensation Off, Auto, Weak, Medium, Strong p.51 Slow Shutter Speed NR Off, On p.
*1 *2 *3 *4 *5 *6 *7 *8 5 Menus 148 This setting can be displayed only when the mode dial is set to 3. This setting can be displayed only when the mode dial is set to P, Av, Tv, TAv, M, or 3. This setting can be displayed only when the mode dial is set to Av, Tv, TAv, or M. This setting can be displayed only when the mode dial is set to Av. This setting can be displayed only when the mode dial is set to Tv. This setting can be displayed only when the mode dial is set to TAv.
[Playback] Menu This menu is displayed in playback mode. Use this menu to manage and correct images. Menu option Page RAW Development p.108 Level Compensation p.104 White Balance Compensation p.106 Color Moire Correction p.107 Trim p.102 Resize p.102 Skew Correction p.103 Clip Movie File p.94 Slide Show p.95 Protect p.99 DPOF p.112 Copy to Card from Internal Memory p.
[Key Custom Options] Menu Use this menu to register frequently used shooting settings and change the functions of buttons and lever. Menu option Page MY 1, MY 2, MY 3, My Settings Box (1 to 6) p.114 Recall My Settings — p.116 Edit My Settings — p.118 Delete My Settings — p.120 ADJ. Lever Setting Off, ISO [ADJ. Lever Setting 1], Picture Size [ADJ. Lever p.120 Setting 2], Aspect Ratio [ADJ. Lever Setting 3], Focus [ADJ. Lever Setting 4], Image, Expo. Metering [ADJ. Lever Setting 5], Cont.
Menu option Settings Page AEL/AFL Setting AFL , AEL·AFL, AEL p.60 C-AF Continuous Setting Off , AF Priority, Shutter Priority p.62 AEL/AFL Lock keep Setting On, Off p.61 AFL Focus Settings Off, Multi AF, Spot AF, Pinpoint AF p.60 One Press M Mode Aprtr Priority, Shttr Priority, Program p.48 Shutter Button Confirmation On, Off p.48 p.121 Restore Defaults — p.
[Setup] Menu Use this menu to set the general operations of the camera. Menu option Settings Page Format [Card] — p.24 Format [Internal Memory] — — Reset File Number — p.128 Change File Name R0 p.127 Folder Name Setting Serial Number, Shooting Date p.127 Card Sequence No. On, Off p.128 5 Copyright Notice — p.129 LCD Brightness Auto , Manual p.124 Menus Operation Sounds All, Shutter Sounds p.126 Volume Settings Off, Low, Medium, High p.126 Auto Power Off Off, 1 to 30 Min.
Menu option Level Setting Settings Off, Level + Tilt, Level Page p.37 Level (Tilt) Calibration Restore Default, Calibration p.37 Conversion Lens Off , Wide p.166 Pixel Mapping — p.160 LCD Confirmation Time Off, 0.5 seconds, 1 second, 2 seconds, 3 seconds, Hold p.34 p.125 Grid 1 , Grid 2, Grid 3 Use DISP. Screen, Graphic Display, Information Display, Grid p.125 Guide, Level Indicator, Histogram Information Display Mode On, Off p.21 p.44 Fn Button Settings On, Off p.
Note-----------------------------------------------------------------------------------------------------------• The [Interval Shooting] and [Custom Self-Timer] settings are reset to their defaults when the camera is turned off. The settings are retained for all other functions. • The options set in the [Shooting] menu can be restored to the default settings by using [Restore Defaults] of the [Shooting] menu.
6 Appendices Trouble Shooting Error Messages If an error message is displayed, take the steps listed below. Error message Insert card. Set the date, time and format. FILE NUMBER OVER Page p.23 p.29 p.126 — p.99 — p.112 p.97 — — p.24 p.24 — — — 6 Appendices Cause and solution No memory card inserted. Insert the card. Date is not set. Set the date. The file number limit has been exceeded. Reset the file numbers or use another memory card. Unmatched File The camera cannot display this file.
Camera Troubleshooting Power Supply Problem The camera does not turn on. Cause Solution The battery is exhausted or not inserted. Correctly insert the battery or charge the battery. The battery is incompatible. Use a compatible battery. The battery is not inserted in the correct Insert in the correct orientation. orientation. The camera turns off The camera has turned off automatically Turn the camera back on. during use. to save power. The battery is exhausted. Charge the battery.
Shooting Problem Cause No picture is taken when shut- The battery is exhausted. ter release button is pressed. The camera is turned off or not in shooting mode. Page p.25 p.27 p.24 p.97 — — — — p.34 p.124 p.21 p.110 — — p.58 p.59 — p.49 p.79 p.79 6 Appendices Solution Charge the battery. Press the POWER button to turn the camera on, or press the 6 button to enter shooting mode. The memory card is not formatted. Format the card. The memory card is full. Insert a new card, or delete unwanted files.
Problem Images are too dark. Cause The subject is poorly lit. The picture display is too dark. The colors of images are un- The camera is unable to adjust white natural. balance for shooting conditions using auto white balance. The picture display brightness Ambient lighting is poor or differs from changes during focusing. that used for autofocus. Level indicators are not [Level Setting] is set to [Off]. displayed. Level indicators are hidden. Solution Open the flash.
Playback/Deletion Problem Shooting information is not displayed. The images cannot be played back, or the images are not displayed on the picture display. Cause Information is hidden. Solution Page Press the DISP. button to display the p.22 information. Reconnect the cable. p.110 AV or HDMI cable is incorrectly connected. The [Video Out Mode] setting is Select another video mode. incorrect. The card was not formatted in this camera.
Miscellaneous Problem Cause Solution The memory card cannot be The card is not in the correct orientation. Insert in the correct orientation. inserted. Camera controls have no effect. The battery is exhausted. Charge the battery. The camera is malfunctioning. Press the POWER button to turn the camera off and back on. Remove and reinsert the battery. Date is incorrect. Date and time are not set correctly. Set the correct date and time. Date has been reset. The battery was removed.
Specifications Camera Lens Focus Focal length 35 mm equivalent focal length Aperture Modes Focus range (From the front edge of the lens) Face detection Number of effective pixels Image sensor Number of Still image recorded pixels Movie File formats White balance Display Exposure control Metering Modes Exposure compensation Shooting modes Effect F2.
Shooting functions 6 Appendices FA/Move target, Crop (35 mm, 47 mm), Continuous shooting, AE bracket (1/2 EV, 1/3 EV), White balance bracket (preset available), Effect bracket, Dynamic range bracket, Contrast bracket, Multiple exposure shooting, Interval shooting*1, Self-timer, Noise reduction, ND Filter (On, Off, Auto), Dynamic range compensation (Auto, Weak, Medium, Strong), Slow Shutter Speed NR, Color space setting, Interval composite, Histogram, Grid guide, Depth-of-field indicator, Electronic level
AC-U1 USB Power Adapter Power supply Output voltage Operating temperature Dimensions Weight 100 VAC to 240 VAC (50/60 Hz), 0.2 A 5.0 VDC, 1000 mA 10°C to 40°C (50°F to 104°F) 42.5 mm (W) × 22 mm (H) × 66.5 mm (D) (excluding power plug) Approx. 40 g (excluding power plug) DB-65 Rechargeable Battery (Lithium-Ion Battery) Nominal voltage Rated capacity Operating temperature Dimensions Weight 3.6 V 1250 mAh (Min.), 1275 mAh, (Typ.) 0°C to 40°C (32°F to 104°F) 35.3 mm (W) × 40.3 mm (H) × 9.4 mm (D) Approx.
Storage Capacity The following table shows the approximate number of images and recording time (in seconds) of movies that can be saved in the internal memory and a memory card in various formats.
Save still image from movie 1920 × 1080 — — 1920 × 1080 47 3328 26927 1280 × 720 — — 1280 × 720 92 6549 52989 640 × 480 — — 640 × 480 256 18087 146340 *1 35 mm equivalent focal length Movie Size Frame Rate Number of recorded pixels Internal memory 4 GB 32 GB w 30 fps 1920 × 1080 36 1277 10226 25 fps 1920 × 1080 43 1542 12349 24 fps 1920 × 1080 44 1606 12857 60 fps 1280 × 720 40 1331 10661 50 fps 1280 × 720 45 1527 12228 30 fps 1280 × 720 61 2118 169
Optional Accessories Conversion Lens, Hood, and Adapter Remove the ring cap before attaching the conversion lens (GW-3) or the lens hood and adapter (GH-3). Removal Turn the camera off and rotate the cap counterclockwise until it can be removed. Attachment With the camera turned off, align the marking on the ring cap (2) with the marking on the camera body (1), and turn the ring cap clockwise until it clicks.
External Flash An optional external TTL flash unit (GF-1) can be connected to the camera hot shoe and used as a TTL auto flash. 1 2 3 4 Close the flash cover. Remove the hot shoe cover from the hot shoe of the camera. Hot shoe Turn the camera and the external flash unit off and attach the flash to the camera hot shoe. Turn the external flash and camera on.
Other Flash Units 1 2 3 4 Attach the flash unit to the hot shoe. Turn on the camera, turn the mode dial to Av, TAv, or M, and set the aperture. Set the ISO sensitivity to a value other than [Auto] or [Auto-Hi]. Turn on the external flash, set it to Auto, and set the aperture value and ISO sensitivity to the same values on the camera.
5 6 7 Select [Wireless Flash Channel] in the [Shooting] menu of the camera, and then press the $ button. Press the !" buttons to select a channel. Select [CH.1], [CH.2], [CH.3], or [CH.4] according to the channel setting of the auto flash used. Shoot. The auto flash fires in synchronization with the shutter.
Using the Camera Abroad Using the AC-U1 USB Power Adapter and BJ-6 Battery Charger These products are for use with currents of 100 V to 240 V and 50 Hz or 60 Hz. Before travelling, purchase a travel adapter for connection to the type of outlets used at your destination. Do not use these products with electrical transformers, as this could damage the camera. Television Playback An AV cable can be used to connect the camera to televisions and monitors equipped with a video input terminal.
Precautions for Use Camera 6 Appendices • This product was manufactured for use in the country of purchase, the warranty is not valid in other countries. • Should the product fail or malfunction while out of the country, the manufacturer assumes no responsibility for servicing the product locally or bearing any expenditure incurred thereby. • Do not drop the camera or subject it to physical shocks. • When carrying the camera, be careful that it does not strike other objects.
AC-U1 USB Power Adapter • • • • • Use the USB cable contained in the package. Do not subject the power adapter to severe impact or force. Do not use in extreme high or low temperatures or areas subject to vibration. Do not use in an area subject to direct sunlight or high temperature. Unplug the power plug from the power outlet after charging. Failure to observe this precaution could result in fire.
Camera Care and Storage Caring for the Camera • Image quality can be affected by fingerprints and other foreign matter on the lens. Avoid touching the lens with your fingers. • Remove dust or lint on the lens with a commercially available blower, or gently clean the lens with a soft, dry cloth. • Clean the camera thoroughly after using it at the beach or handling chemicals. • In the unlikely event of malfunction, consult your nearest repair center. • The camera contains high-voltage circuits.
Warranty Policy All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase.
NOTICES For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Pour les utilisateurs au Canada Industrie Canada (IC) Avis de Conformité Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste. Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Index Numbers 1st Curtain (Flash)......................................... 82 2nd Curtain (Flash)....................................... 82 A ADJ. Direct ISO Control............................... 49 ADJ. lever......................................................... 17 ADJ. Lever Setting..................................... 120 ADJ. mode.................................................... 121 AEL/AFL Lock keep Setting....................... 61 AEL/AFL Setting............................................
Exif data........................................................ 129 Exposure.......................................................... 42 Exposure Bracket.......................................... 74 Exposure Compensation........................... 48 Exposure Metering...................................... 52 External flash............................................... 167 F FA/Move Target............................................. 63 File name......................................................
N Name (My Settings).................................. 119 ND Filter........................................................... 53 NFC mark............................................... 15, 134 Noise Reduction........................................... 50 Normal indicator display........................... 22 NR....................................................................... 50 O One Press M Mode....................................... 48 Operation Sounds.....................................
Thumbnail view............................................ 95 Tilt...................................................................... 36 Time................................................................... 46 Toning Effect.................................................. 83 Trim................................................................. 102 Tripod screw hole......................................... 15 TV.................................................................... 110 Tv mode............
Memo 182
183
RICOH IMAGING COMPANY, LTD. 2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.ricoh-imaging.co.jp) RICOH IMAGING EUROPE S.A.S. Parc Tertiaire SILIC 7-9, avenue Robert Schuman B.P. 70102, 94513 Rungis Cedex, FRANCE (http://www.ricoh-imaging.eu) RICOH IMAGING 633 17th Street, Suite 2600, Denver, Colorado 80202, AMERICAS CORPORATION U.S.A. (http://www.us.ricoh-imaging.com) RICOH IMAGING CANADA INC. 5520 Explorer Drive Suite 300, Mississauga, Ontario, L4W 5L1, CANADA (http://www.