Operation Manual

2
Playback Functions
100
Setting Protection for Multiple Files Simultaneously
1 Select [Protect] in the [Playback] menu, and then press the $
button.
When in 20-image or 81-image view, proceed to Step 3.
2 Select [Sel. Multiple], and then press the MENU/OK button.
3 Select [Sel. Indiv.] or [Sel. Range], and then press the MENU/OK
button.
4 Press the !"#$ buttons to select images, and then press the
MENU/OK button.
The protection symbol is displayed in the top right corner of the thumbnail.
If [Sel. Range] is selected, select the image that is the starting point of the
range.
If the ADJ. lever is pressed, the selection screen in Step 3 reappears.
If [Sel. Indiv.] is selected, proceed to Step 6.
5 Press the !"#$ buttons to select
the image that is the ending point of
the range, and then press the MENU/
OK button.
Repeat Steps 4 and 5 to specify all of the
ranges.
If you select images with protection already
set, protection is canceled.
6 Press the Fn2 button.
A message appears to indicate processing is being performed, and then the
previous screen reappears when the setting is complete.