Operation Manual

28
Before You Begin
Note -----------------------------------------------------------------------------------------------------------
• To save the battery power, you can set the following functions in the [Setup] menu.
Operation When the setting is disabled
Auto Power Off
The camera will turn off automatically
if no operations are performed during
the set time. You can set this to [Off]
or a certain number of minutes up to
30 minutes in increments of 1 minute.
To resume operation, turn the camera
on again.
• During movie recording
• During multiple exposure shoot-
ing, interval shooting, or interval
composite
• During movie playback or slide
show
• During processing
• While Wi-Fi connection is estab-
lished
• While the camera is connected to
a computer
Sleep Mode
The camera dims the display automat-
ically if no operations are performed
during the set time. You can set this to
[Off] or a certain number of minutes
up to 30 minutes in increments of
1 minute.
To resume display brightness, operate
the camera.
• During multiple exposure shoot-
ing, interval shooting, or interval
composite
• During playback
• While the camera is connected
with an AV or HDMI cable
• While the Wi-Fi function is en-
abled
LCD Auto Dim
The camera dims the display auto-
matically if the camera is not moved
within five seconds. You can select
[On] or [Off].
• The POWER button lamp can be set to [On] or [Off] in [Power Button Lamp] of the [Setup] menu.