Operation Manual

Various Shooting Functions

Automatic Exposure

[Off]: Does not adjust the exposure value.

[On]: Merges images while adjusting the exposure value depending on the

number of images.

Save Each Image

[Off]: Saves only the final merged image.

[On]: Saves each unmerged image.

Save in process

[Off]: Saves only the final merged image.

[On]: Saves each merged image.

3 Press the MENU/OK button.

[Multiple Exposure Shooting] appears on the shooting screen.

4 Take the first image.

5 To take the next image, select [Next

shot >], and then press the MENU/

OK button.

To retake the image, select [Retake shot].

6 Take the next image.

Repeat Steps 5 and 6.

To return to the previous merged image, select [Retake shot]. To end multiple

exposure shooting, select [Complete].

When shooting ends after the fifth image is taken or when [Complete] is se-

lected, the merged image is saved.

Note -----------------------------------------------------------------------------------------------------------

• If [Multi Exposure] is set to the Fn1, Fn2, and Effect buttons in the [Key Custom Options] menu, you

can start the multiple exposure shooting with button operation only. (p.122)

Caution -------------------------------------------------------------------------------------------------------

• The settings for the following functions cannot be changed during the multiple exposure shooting.

• Crop

• Effect/Image Settings