User manual

6
Appendices
160
Miscellaneous
Problem Cause Solution Page
The memory card cannot be
inserted.
The card is not in the correct orientation. Insert in the correct orientation. p.23
Camera controls have no effect. The battery is exhausted. Charge the battery. p.25
The camera is malfunctioning. Press the POWER button to turn the
camera off and back on.
p.27
Remove and reinsert the battery. p.23
Date is incorrect. Date and time are not set correctly. Set the correct date and time. p.29
Date has been reset. The battery was removed. If the battery is removed for more than
about five days, the date setting will be
lost. Make the settings again.
p.29
Images are not displayed on
an AV device.
The [Video Out Mode] setting is
incorrect.
Select another video mode. p.111
AV or HDMI cable is incorrectly
connected.
Reconnect the cable. p.110
The input setting of the AV device is
incorrect.
Check the input setting of the AV device. —
Pixel defects such as bright
spots and dark spots appear in
the image.
There are defective pixels in the sensor. Activate [Pixel Mapping] of the [Setup]
menu. It takes about 30 seconds to cor-
rect the defective pixels, so be sure to
install a fully charged battery.
—