User manual
Table Of Contents
- Introduction
- Before You Begin
- First Steps
- Advanced Operations
- 1 Various Shooting Functions
- 2 Playback Functions
- 3 Changing Camera Settings
- 4 Making Use of Images
- 5 Menus
- 6 Appendices
6
Appendices
169
5 Select [Wireless Flash Channel] in the [Shooting] menu of the
camera, and then press the $ button.
6 Press the !" buttons to select a channel.
Select [CH.1], [CH.2], [CH.3], or [CH.4] according to the channel setting of the
auto flash used.
7 Shoot.
The auto flash fires in synchronization with the shutter.
Note -----------------------------------------------------------------------------------------------------------
• If the distance between the auto flash and the camera is too long, the flash may not fire. Keep the
distance between the built-in flash of the camera and the auto flash and the distance between the
auto flash and the subject within approximately 4 m.
• If the charging of the auto flash is not complete, the flash does not fire.