User Manual

Various Shooting Functions

Shooting with Miniaturize

Images that give the impression that they are close-ups of a miniature can

be taken. This mode is effective when shooting from a high vantage point

while looking down at a diagonal angle.

1 In [Effect] of the [Shooting] menu, select [Miniaturize].

To change settings such as [Toning Effect], press the Fn2 button.

2 Press the MENU/OK button.

The miniaturize shooting screen appears.

The areas outside of the unblurred (focus area) are shown in a semi-trans-

parent gray.

3 Press the Fn2 button.

The screen for setting the position and range of blurring appears.

4 Press the !" buttons to move the

position of the focus area.

Change the vertical/horizontal orientation

of the focus area by pressing the Fn2 button

while this screen is displayed.

5 Press the #$ buttons to set the width of the focus area.

6 Press the MENU/OK button.

The shooting screen reappears.

Note -----------------------------------------------------------------------------------------------------------

• The amount of blurring in the image shown on the confirmation screen immediately after shooting

differs slightly from that of the actual image.