Instruction Manual The serial number may be found on the bottom of the camera. Before You Begin Read this section before use. It covers the names of the parts and how to prepare the camera for use. First Steps Read this section before using your camera for the first time. It covers the basic operations for using your camera for the first time, including how to turn on the camera, take pictures, and play back images.
Checking the Package Contents Before using your digital camera, confirm that the package contains the items listed below. GR Hot shoe cover (attached to camera) g g Power plug g g Rechargeable battery (DB-65) USB power adapter (AC-U1) USB cable Hand strap CD Instruction manual (this manual) Please complete the user registration Thank you for purchasing a PENTAX RICOH IMAGING product.
Introduction This instruction manual provides information on how to use the shooting and playback functions of this camera and related precautions. Thoroughly read this instruction manual to make the best use of the functions available with this camera unit. Be sure to keep this instruction manual for future reference. PENTAX RICOH IMAGING CO., LTD. Safety precautions Read all safety precautions thoroughly to ensure safe use.
Microsoft, Windows, Windows 7®, Windows 8®, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States of America and other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States of America and other countries. Adobe, the Adobe logo, and Adobe Reader are trademarks of Adobe Systems Incorporated. The SDXC logo is a trademark of SD-3C, LLC. This product incorporates DNG technology with the permission of Adobe Systems Incorporated.
Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. Danger This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled. Warning This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled.
n n n Do not charge the battery with a charger from another manufacturer. Also, do not use the battery with any camera except the cameras compatible with the DB-65. Discontinue use immediately in the event of abnormalities such as smoke, unusual odors, or excessive heat being emitted. Contact your nearest dealer or service center for repair.
n • • • • n n n n n n n n n n Please observe the following in order to prevent fire, electrical shock or cracking of the battery while charging. Use only the indicated power supply voltage. Also avoid the use of multisocket adapters and extension cords. Do not damage, bundle or alter power cords. Also, do not place heavy objects on, stretch or bend power cords. Do not connect or disconnect the power plug with wet hands. Always grip the plug section when disconnecting a power cord.
n n n n n n n n n n n Do not connect or disconnect the power plug with wet hands. Both operations pose the risk of electric shock. Always grip the plug section when disconnecting a power cord. Do not pull the power cord. This can damage the power cord and result in fire or electric shock. If any metallic object, water, liquid or other foreign object gets into the camera, immediately remove the power cord from the outlet and contact a service center for repair.
n n n n n Remove the power cords from the outlets before cleaning the equipment. Remove the power cords from the outlets when not in use. Do not cover equipment while charging, as this can result in fire. Do not short the terminals or metal contacts on the power cords, as this can result in fire. Do not use the equipment in wet areas or areas subject to oil smoke as this could result in fire or electric shock.
Table of Contents Introduction............................................................................................................................. 1 Table of Contents................................................................................................................... 8 Before You Begin 13 Parts of the Camera.............................................................................................................14 Using the Dial and Lever.........................................
Setting the White Balance ...............................................................................................59 Setting the Color Temperature..............................................................................61 Setting the White Balance.......................................................................................61 Shooting Continuously......................................................................................................62 Shooting Continuously................
Correcting Skewed Images.....................................................................................89 Correcting Brightness and Contrast (Level Compensation).......................90 Correcting the White Balance................................................................................92 Correcting Color Moire............................................................................................92 Developing RAW Files.......................................................................
6 Appendices 125 Trouble Shooting...............................................................................................................125 Error messages..........................................................................................................125 Camera Troubleshooting.......................................................................................126 Specifications..............................................................................................................
12
Before You Begin This covers the names of parts and how to prepare the camera for use. Parts of the Camera........................ 14 Using the Dial and Lever............... 16 Picture Display................................ 18 Getting Ready.................................
Parts of the Camera 1 2 3 4 5 6 7 15 8 Before You Begin 9 10 12 13 14 11 16 26 27 28 33 34 35 36 37 17 18 19 20 21 22 23 24 25 14 29 30 31 32
Up-down dial..........................................P. 17 20 Terminal cover................................. P. 26, 123 2 Mode dial lock release button.................P. 16 21 DC power cable cover................................— 3 Mode dial................................................P. 16 22 Speaker.....................................................— 4 Shutter release button............................P. 32 23 Release lever...........................................P.
Using the Dial and Lever Mode Dial You can change the shooting mode with the mode dial. Before You Begin Press the mode dial lock release button (1) and rotate the mode dial (2). Av: Aperture priority mode (P. 40) You set the aperture, and the camera adjusts the shutter speed automatically. P: Program shift mode (P. 40) You can choose from combinations of aperture and shutter speed. 5: Auto shooting mode (P. 32) Automatically sets the optimal aperture and shutter speed depending on the subject.
Up-down dial/ADJ. lever Use the up-down dial and ADJ. lever in place of the !"#$ buttons and to set the exposure. (GP. 41) Up-down dial Before You Begin ADJ. lever Operation Up-down dial ADJ. lever Description Rotate left or right Replaces the !" buttons. Changes the aperture/shutter speed. Press left or right Replaces the #$ buttons. Changes the aperture/shutter speed/ISO Setting. Push in the middle Calls assigned function (GP.
Picture Display Shooting display 1 2 3 4 5 6 7 8 9 10 33 Before You Begin 11 12 14 26 27 28 29 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 10 36 30 31 32 Still image mode 3 35 20 21 22 23 24 25 13 1 2 34 15 16 17 18 19 Flash mode.............................................P. 69 Flash compensation/manual flash amount .........................................................P. 70, 71 Multiple exposure shooting/Interval shooting/Interval composite................P. 64, 66, 67 Continuous......
Playback display 1 10 3 4567 8 11 12 13 14 15 16 Still image mode 1 2 3 4 5 6 7 8 9 Folder-file number................................P. 111 Current frame/Total frames.......................— Battery level............................................P. 20 Eye-Fi connection....................................P. 20 Protected image......................................P. 85 DPOF print indicator................................P. 95 Data source.............................................P.
Battery Level Indicator Icon Status Battery fully charged. Battery partially charged. Recharging the battery is recommended. Before You Begin Low battery. Recharge the battery. Eye-Fi Connection When using an Eye-Fi card (GP. 24), the connection status is displayed in the shooting and playback modes. Icon Status Not connected Connecting Waiting for data transfer Transferring Connection terminated Transferred images Eye-Fi card information acquisition error • Turn the camera off and on.
Changing the Display Use the DISP. button to change the information displayed on the picture display. Shooting Mode Information display Level Before You Begin Select from the following displays in shooting mode: Grid guide Histogram Graphic display Information display You can specify the information displayed each time the DISP. button is pressed in [DISP. Button Display Setting] on the [Setup] menu. (GP.
Playback Mode Detailed information display No indicator display White saturation display Before You Begin Normal indicator display Note-----------------------------------------------------------------------------------------------------------• If [On] is selected for [White Saturation Display] in the [Setup] menu, the white saturation areas of the image flash in black in the Highlights display. When this is set to [Off] (default setting), the white saturation display is not shown.
Getting Ready Prepare the camera for use. Inserting the Battery and a Memory Card SD memory cards, SDHC memory cards, and SDXC memory cards can be used with this camera. (“Memory card” refers to these memory cards in this guide.) 1 2 Slide the release lever on the bottom of the camera toward OPEN to open the battery/ card cover. Before You Begin Be sure the camera is off before inserting or removing the battery and memory card.
Eye-Fi Cards--------------------------------------------------------------------------------------------------• This camera is compatible with Eye-Fi cards (X2 Series), SD memory cards with built-in wireless LAN functionality. For more information on Eye-Fi cards, visit the Eye-Fi Website (http://www.eye.fi/). • When using an Eye-Fi card, the following settings are displayed in the [Setup] menu. [Off]: Disables the wireless LAN function for operation as a normal SD memory card.
Data Storage Location Pictures taken with this camera can be recorded to the internal memory or a memory card. When a memory card is not set in the camera, data is recorded to the internal memory. Caution-------------------------------------------------------------------------------------------------------- Note-----------------------------------------------------------------------------------------------------------• You can copy all data stored in the internal memory to a memory card. (GP.
Charging the Battery Charge the rechargeable battery (DB-65) using the included USB cable and USB power adapter (AC-U1) with included Power plug before use. 1 Insert the Power plug to the USB power adapter. Before You Begin Insert it until it clicks into place. 2 3 Open the terminal cover, and connect the USB cable to the USB/ AV OUT terminal. Connect the USB cable to the USB power adapter. 4 3 4 26 Plug the USB power adapter into a power outlet.
Storage capacity--------------------------------------------------------------------------------------------- Caution-------------------------------------------------------------------------------------------------------• Use only genuine rechargeable batteries (DB-65). • If the auto focus/flash lamp blinks during charging, the USB power adapter or battery has a problem. Unplug the USB power adapter from the power outlet and remove the battery. • The battery may become very hot immediately after operation.
Turning the Camera On and Off Press the POWER button to turn the camera on. The POWER button lights, and then the auto focus/flash lamp blinks for several seconds. Before You Begin When the POWER button is pressed again, the power turns off. (If the date is not set, [0] is displayed.) Using the Camera in Playback Mode Press and hold the 6 button for at least one second to turn the camera on in playback mode. Press the 6 button again to turn the camera off.
Note-----------------------------------------------------------------------------------------------------------• To save battery power, you can set the following functions in the [Setup] menu. Operation When the setting is disabled Sleep The camera dims the display automati- • When recording movies or durcally if no operations are performed dur- ing continuous shooting ing the set time.
Setting the Date and Time When the power is turned on for the first time, the [Date Settings] screen appears. 1 Set the year, month, day, hour, minute, and date format. Before You Begin Press #$ to select an item, and press !" to change the value. To cancel the setting press the r button. 2 Press MENU/OK. 3 Press MENU/OK. A confirmation screen appears. The date is set.
First Steps Read this section before using your camera for the first time. Basic Shooting................................ 32 Playing Back Images...................... 37 Using the Menu...............................
Basic Shooting Now you are ready. Taking Photographs with Auto Settings First Steps 1 2 3 4 32 Turn the mode dial to 5. Press the mode dial lock button and rotate the mode dial. To use the flash, slide the FOPEN switch down. The flash opens. The auto focus/flash lamp blinks while the flash charges. Once the flash is charged, the lamp turns off and the camera is ready to shoot. The flash will not fire when the flash cover is closed. Half-press the shutter release button.
Focus----------------------------------------------------------------------------------------------------------• The autofocus/flash lamp and the frame color show whether the subject is in focus. Auto focus/flash lamp Focus status Frame Color Auto focus/flash lamp Camera has not yet focused. White Off Subject in focus Green On (green) Camera unable to focus.
ISO, and white balance settings. The shooting conditions are not held in the following cases: • Self-timer • Interval timer shooting • Interval composite • 3 mode Self-Timer First Steps The self-timer can be set to two seconds or a custom setting. A setting of two seconds is useful for preventing camera shake. With [Custom Self-Timer], you can set the storage capacity and the shooting interval. 1 Press the t button. 2 Take a picture. The Self-timer setting screen appears.
Checking the Camera Level and Tilt This camera has a built-in level indicator that can be used to indicate the level and tilt of the camera on the picture display. You can check for the horizontal level and tilt in the forward-backward direction. Press and hold the DISP. button. 2 Press the !" buttons to select a setting. 3 First Steps 1 The menu is displayed. Off Indicators are not displayed. Level + Tilt Displays the level and tilt indicators.
Yellow Red First Steps When tilted forward Camera is rotated too far forward or backward or unable to measure tilt. Note-----------------------------------------------------------------------------------------------------------• The indicators are displayed only when [Level Indicator] is set to [On] in the [DISP. Button Display Setting] in the [Setup] menu. (GP. 110) • The indicators can also be set in [Level Setting] in the [Setup] menu.
Playing Back Images Images can be viewed in the picture display. 1 The camera switches to playback mode and the last still image you took is displayed. Press the #$ buttons to change the displayed image. First Steps 2 Press the 6 button. You can perform the following operations: # button Back one photo $ button Ahead one photo Press and hold #$ buttons Fast Forward To switch the camera back to shooting mode, press the 6 button again.
Using the Menu 1 First Steps 2 Press MENU/OK. The menu is displayed. The menu that is displayed first varies depending on the mode when the button is pressed. To change the menu, press the # button, use the !" buttons to select a tab, and then press the $ button. Press the !" buttons to select an item. Pressing the X/Y button moves the cursor to the head of the menu delimiter (horizontal line). 3 4 5 Press the $ button. The options are displayed. Press the !" buttons to select an option.
Advanced Operations Read this section when you want to learn more about the different camera functions. 1 2 3 4 1 2 3 4 5 Various Shooting Functions..... 40 Playback Functions.................... 81 Changing Camera Settings...... 99 Menus.........................................114 Downloading Images to Your Computer.........................122 6 Appendices...............................
1 Various Shooting Functions Select a shooting mode to match the scene. Mode Purpose Page 5 For easy shooting P. 32 1 P/Av/Tv/TAv/M For shooting with a set aperture value and shutter speed P. 40 3 For shooting movies P. 78 Various Shooting Functions MY1/MY2/MY3 For registering favorite settings P. 102 Shooting with a set aperture value and shutter speed Set an aperture value or shutter speed when shooting. The following values can be set.
1 2 Set the mode dial to P/Av/Tv/TAv/M. The symbol for the selected shooting mode and the set value will be displayed on the shooting screen. In M mode, the exposure indicator will be displayed. Rotate the up-down dial to change a value. 1 Mode 3 Up-down Dial ADJ. Lever Av Aperture value — Tv Shutter speed — TAv/M Aperture value Shutter speed When in M mode, the exposure is correct when the indicator is in the center.
1 • If the following functions have been set in the [Shooting] menu, and the correct exposure cannot be obtained for the aperture value/shutter speed set in Av/Tv/TAv modes, the camera will automatically adjust the settings to obtain the correct exposure. • Av [Auto Aperture Shift] • Tv [Auto Shutter Speed Shift] • TAv [Shutter/Aperture Auto Shift] (Selects from [Aprtr Priority] or [Shttr Priority) • In M mode, the X/Y button cannot be used for exposure compensation.
Program diagram------------------------------------------------------------------------------------------• The program diagram in P mode is shown below. The guide for possible shift in a particular aperture value and shutter speed combination will change depending on the exposure value (Ev). (The example shows when the ISO speed has been set to [ISO 100].
Using Aperture Preview Press and hold the p button during the shutter release button is pressed halfway or using the AE lock, the camera will switch to Aperture Preview. The aperture value set when shooting will operate, and you can check the depth of field. When you release the p button, Aperture Preview will be canceled.
Exposure settings Using exposure compensation 1 Settings can be made in the range from –4.0 EV to +4.0 EV. You can also shoot without making further adjustments. Press the MENU/OK button. The shooting screen will reappear, and the setting appears on the screen. 1 Various Shooting Functions 2 Set a value using the X/Y button. Caution-------------------------------------------------------------------------------------------------------• This function is not available in M or 3 modes.
Setting the ISO speed In the [Shooting] menu, the ISO speed can be set in [ISO Setting/NR]. Auto 1 In ISO 100 – ISO 800, the camera automatically adjusts sensitivity according to brightness, the distance to the subject, macro settings, and the format. Various Shooting Functions Auto-Hi (high sensitivity auto) The sensitivity can be set higher than in [Auto]. • In the [Setup] menu, the maximum ISO speed, and the ISO speed for switching shutter speeds can be set in [ISO AUTO-HI Settings] .
Reducing noise You can reduce the amount of noise in still images. 1 2 4 5 The [ISO Setting/Noise Reduction] screen will appear. Press the !" button to select [Noise Reduction] and then press the $ button. Press the !" button to select [Off], [Auto], or [Manual]. When [Off ] or [Auto] have been selected, proceed to step 5. Press the !"#$ button to specify the ISO speed to apply from [Strong], [Medium], or [Weak].
Dynamic range correction In the [Shooting] menu, you can use [Dynamic Range Correction] to expand an images gradation, making sure the bright and dark portions of an image are clearly visible. You can select from [Off ], [AUTO], [Weak], [Medium], and [Strong]. 1 A symbol will appear on the screen when dynamic range correction has been set.
Selecting a metering method In the [Shooting] menu, set [Exposure Metering]. Multi Center The entire image is metered, with emphasis on the center, to determine the exposure value. Use this when the brightness of the center and surroundings are different. The center of the image is metered to determine the exposure value. Use this setting when you want to use the brightness at the center. This is useful if there is a marked difference in contrast or backlighting.
Setting a still image format In the [Shooting] menu, the still image format, size, and aspect ratio can be selected in [Still Image Format]. Format/Size o: p: q: r: s: u: Aspect ratio 3:2/4:3/1:1 1 Various Shooting Functions Records a q sized RAW file (DNG format). Records a RAW file simultaneously with a q sized JPEG file.
Setting the focus Selecting a focusing method In the [Shooting] menu, set [Focus]. Measures the distances from 9 AF areas and focuses to the nearest AF area. This prevents the center of the picture display from becoming out of focus and enables you to shoot with a minimum number of out-of-focus pictures. [Default Setting] Spot AF Focuses on the area in the center of the frame. Pinpoint AF Subject-tracking AF Focuses on a smaller area than Spot AF. Tracks the subject and continually focuses.
• In [Subject Tracking AF], the following functions are not available. • Self-Timer [Custom Self] • Interval timer shooting • Interval Composite • FA/Move Target Focusing manually 1 If the camera fails to focus automatically, you can focus manually. Various Shooting Functions Manual focus enables shooting at a fixed distance. 1 2 In the [Shooting] menu, select [MF] in [Focus]. A symbol and the focus bar will appear in the shooting screen.
Shooting close-ups (Macro Mode) You can approach the subject up to 10 cm (shooting range: approx. 12 x 8 cm) away from the end of the lens to shoot. 1 Press the N (!) button in shooting mode. N appears on the shooting screen. Shoot. To cancel macro mode, press the N button again. Various Shooting Functions 2 1 Note-----------------------------------------------------------------------------------------------------------• The focus will operate as [Spot AF] or [Pinpoint AF].
Using the AF button When the AF button is used, AE Lock or AF Lock are available in place of pressing the shutter release button halfway. You can use the AF Function Switching Lever to AF Function Switchswitch the AF button’s function. ing Lever 1 Various Shooting Functions AF button Using AEL/AFL with the AF Function Switching Lever These functions operate following the [AEL/AFL Setting] in the [Key Custom Options] menu.
Note-----------------------------------------------------------------------------------------------------------• When AF Lock cannot be set, or when AF Lock is canceled, the focus will move to the position set in [Focus]. • When the focus is locked with the AF button, the AE/AF lock position will not change even when the shutter release button is pressed halfway.
Setting Focus Assist and AE/AF Target Without moving the camera you can meter a specific spot on the subject using buttons only, and activate the focus lock. This function is useful for shooting on a tripod. You can enlarge part of the screen and emphasize outlines and contrast to make it easier to focus. 1 1 Various Shooting Functions 2 The target setting screen will appear. Set the target position and size. The following operations are available.
The following settings are available. Specifies the target to move from AE/AF, AF, and AE. Focus Assist Setting Intensifies the outlines and contrast inside the area, making it easier to adjust the focus. [MODE1] Emphasizes contrast and outlines [MODE2] Emphasizes outlines [MODE3] Black and white reversal of MODE1 [MODE4] Black and white reversal of MODE2 Magnification Setting Specifies the magnification area. [Magnify portion]: Magnifies the target area and overlays the display on the background.
Shooting with a single press of the shutter release button (Full Press Snap) 1 When pressing the shutter release button halfway AF operates, however, pressing the shutter release button all the way will quickly capture an image at the set focal distance. This function is called Full Press Snap. The camera will focus at the distance set in [Snap Focus Distance] in the [Shooting] menu (GP. 52). In the [Shooting] menu, this is set in [Full Press Snap].
Setting the White Balance Make adjustments to the white balance so that white subjects will appear white under any kind of light. [Multi-P AUTO] is set by default. If the white balance is not how you thought it would be when shooting an object of a single color or when shooting under multiple light sources, you can change the setting.
Specifies the color temperature. (GP. 61) Detail Adjust the white balance manually. (GP. 61) Manual 1 1 Various Shooting Functions 2 3 4 Press the WB (") button in shooting mode. The [White Balance] screen appears. Select the setting with the !" button. If no corrections are required, proceed to step 6. See P. 61 for [Details] [Manual]. Press the Fn2 button. The [White Balance Compensation] screen appears. Make point adjustments with the !"#$ buttons. Press the r button to reset.
Caution-------------------------------------------------------------------------------------------------------• The white balance may not be adjusted correctly for a subject that is mostly dark. • When shooting with the flash, the white balance may not be adjusted correctly if [AUTO] or [Multi-P AUTO] is not selected. Setting the Color Temperature 1 The [White Balance Detailed Settings] screen appears. 2 Set the value with the !" buttons. 3 Press the MENU/OK button. 4 Press the MENU/OK button.
Shooting Continuously The continuous shooting functions are as follows. 1 Various Shooting Functions Continuous Continues to take pictures for as long as you hold down the shutter P. 62 release button. Auto Bracket Takes three images with varying exposure, white balance, effects, P. 63 dynamic range, or contrast. Multiple Exposure Merges multiple images together. P. 64 Interval Shoots automatically at a fixed interval. P.
• If the last four digits of the file number taken during continuous shooting exceed [9999], a separate folder is created in the SD memory card and successive pictures taken are stored in this folder. • If the number of files stored in a memory card exceeds 10000, files with a small folder/file number cannot be played back. However, they are not deleted or lost. • [Continuous] can be registered and used in the [Key Custom Options] menu under [ADJ. Lever Setting] or in [Set Fn Button]. (GP. 105, P.
Note-----------------------------------------------------------------------------------------------------------• When [AE-BKT 1/3EV], [AE-BKT 1/2EV], or [DR-BKT] is selected and the white balance is set to [MultiP AUTO], the white balance will work in [AUTO]. • [Auto Bracket] can be registered and used in the [Key Custom Options] menu under [ADJ. Lever Setting] or in [Set Fn Button]. (GP. 105, P.
Automatic Exposure [Off]: The exposure value is not adjusted. [On]: The exposure value is adjusted to match the number of shots to be merged. Save Each Shot [Off]: Saves only the final merged image. [On]: Saves all of the unmerged images. Save Images In Prog- [Off]: Saves only the final merged image. ress [On]: Saves the image with each merge. 4 5 Press the MENU/OK button. [Multiple Exposure Shooting] appears on the shooting screen. Shoot the first image.
Shooting Pictures Automatically at Set Intervals (Interval Shooting) Shoots pictures automatically at fixed intervals. 1 1 Various Shooting Functions 2 3 In the [Shooting] menu, select [Interval Shooting], and then press the $ button. The [Interval Shooting] screen appears. Select minutes/seconds with the #$ buttons, and then set the interval value with the !" buttons. You can set the shooting interval from among 1 second, 2 seconds, or between 5 seconds and 1 hour (in 5-second increments).
Shooting Star Trails (Interval Composite) Merges a series of continuous images taken at fixed intervals in such a way that the bright areas remain. Use when you want to record the trails of light formed by stars or the moon by shooting a fixed position in nightscapes. 1 2 4 Set the mode dial to Av/Tv/TAv/M, and then try taking a shot. Set the aperture value/shutter speed/focus/ISO sensitivity/white balance, and then check the composition. This exposure will be maintained as shots are merged.
7 Press MENU/OK to end shooting when all the desired photographs have been taken. The merged image will be saved. Caution-------------------------------------------------------------------------------------------------------- 1 Various Shooting Functions 68 • • • • • • If pressing the MENU/OK button while taking a shot, the shot will not be merged. The flash cannot be used with this function. The ISO sensitivity cannot be set to higher than [ISO 1600].
Using the Flash Setting the Flash Mode Auto The flash fires automatically when the subject is poorly lit or backlit. [Default setting] The flash always fires. Flash Synchro. The flash fires with the shutter speed slowed. Use when taking nightscape shots that include people. Use of a tripod is recommended to prevent blur. Manual Flash The flash output is set under [Manual Flash Amount] in the [Shooting] menu. (GP. 71) Reduces “red-eye” in portraits taken with the flash.
Note-----------------------------------------------------------------------------------------------------------• The flash mode cannot be changed when the flash cover is closed. • If the ISO sensitivity is set to [Auto], the range the light from the flash will reach is from approximately 20 cm to 3.0 m from the end of the lens. • The flash fires a pre-flash to increase the AE accuracy. The pre-flash does not fire when set to [Manual Flash].
Note---------------------------------------------------------------------------------------------------------• When the flash mode is set to [Manual Flash], the value set for [Flash Exposure Compensation] is invalid. • [Flash Comp.] can be registered and used in the [Key Custom Options] menu under [ADJ. Lever Setting] or in [Set Fn Button]. (GP. 105, P. 107) Setting the Flash Intensity for Manual Flash Sets the intensity of the internal flash if the flash mode is set to [Manual Flash]. press the $ button.
Shooting Photos with Unique Atmosphere Takes images with varied saturation and contrast. Effect Changes things like the hue for distinctive images. 1 Various Shooting Functions Black & White B&W (TE) High Contrast B&W Cross Process Positive Film Bleach Bypass Retro Miniaturize High Key 72 Creates a black and white picture. The [Contrast], [Sharpness], and [Vignetting] can be set. Adds tint to black-and-white images.
Image Settings Takes images with modulated saturation, contrast, sharpness, and vignetting. Increases the contrast, sharpness, and saturation beyond [Standard] for an image quality that feels solid. Vivid Sets the [Saturation], [Contrast], [Sharpness], and [Vignetting]. Setting 1/2 1 2 3 4 In the [Shooting] menu, select [Effect] [Image Settings], and then press the $ button. Select the setting with the !" buttons. If selecting [Vivid] or [Standard], proceed to step 5. Press the $ button.
Caution-------------------------------------------------------------------------------------------------------• • • • If an [Effect] is set, the [Image Settings] are invalidated. [Vignetting] cannot be set in 3 mode. Settings made in [Effect] and [Image Settings] are not applied to RAW images. [Effect] cannot be used with the following functions.
Shooting with Miniaturize Takes images that give the impression that they are close-ups of a miniature. This mode is effective when shooting from a high vantage point while looking down at a diagonal angle. 1 3 4 5 6 7 The [Effect] > [Miniaturize] screen appears. Press the !"#$ buttons to change the settings, and then press the MENU/OK button. Press the MENU/OK button. The Miniaturize shooting screen appears. The areas outside of the unblurred focus area are shown in a semi-transparent gray.
Other Shooting Functions Adding the Date to Still Images 1 If [Date] or [Time] is selected in the [Date Imprint] area of the [Shooting] menu, either the date (Year/Month/Day) or the date and time (Year/Month/ Day Hour:Minute) will be imprinted on the lower-right corner of still images. Various Shooting Functions An indicator is displayed in the bottom right corner of the shooting screen when date imprint is on.
4 Use the !"#$ buttons to select [Still Image Size] and [Frame Rate]. The following settings can be made. The frame rates that can be selected depend on the still image size. 50 30 25 24 w (1920×1080) N N Y Y Y x (1280×720) Y Y Y Y Y n (640×480) N N Y Y Y 5 Press the MENU/OK button. The [Shooting] menu returns.
Shooting Movies 1 2 1 Various Shooting Functions 3 Turn the mode dial to 3. Press the shutter release button. Movie shooting starts. While shooting, the “REC” indicator blinks, and the recording time and time remaining are shown. Press the shutter release button again. Shooting ends. Caution-------------------------------------------------------------------------------------------------------• If the camera is operated while shooting, the operation sounds will also be recorded.
Playing Back Movies 1 2 Press the 6 button. The camera goes into playback mode. Select a movie with the #$ buttons. 3 Press the ! button. Playback starts. A progress indicator and the elapsed time are shown. 1 Various Shooting Functions Movies are indicated by a 3 icon. The first frame of the movie is displayed as a still image. The following operations can be performed.
Clipping Movies The unnecessary parts at the beginning or end of a movie can be deleted, and the movie can be saved as a new file. 1 1 Various Shooting Functions 2 3 4 5 80 Bring up the movie to be edited in playback mode, and then press the MENU/OK button. The [Playback] menu appears. Select [Clip Movie File], and then press the $ button. The [Clip Movie File] screen appears. Press the ADJ. lever to select either the beginning or the end.
2 Playback Functions Displaying Images in Thumbnail View Pressing the 8 (X)/9 (Y) button in playback mode displays multiple images in thumbnail view. 20-frame view 81-frame view 2 !"#$ button Selects an image. ADJ. Lever Displays the selected image in single image view. DISP. button Changes between single image selection and page selection. Playback Functions The following operations are possible. Displaying Images in a Slide Show You can display shot images sequentially.
Displaying Images in Enlarged View You can display still images enlarged. The following operations are possible. 2 Playback Functions 8 (X) button/ Turn the up-down dial right Enlarges the image. 9 (Y) button/ Turn the up-down dial left Reduces the image. !"#$ buttons Moves the area to display enlarged. ADJ. Lever Press: The image is enlarged in one go to the magnification (4x, 8x, or 16x) set in [One Press Zoom Ratio] in the [Setup] menu.
Organizing Files Deleting Files Deleting One File 1 2 3 Display the image to delete in playback mode. Press the D button. You can change the file with the #$ buttons. 4 2 Playback Functions Use the !" buttons to select [Delete One]. Press the MENU/OK button. The file is deleted. To delete another file, repeat steps 3 to 4. To end the process, select [Cancel]. Deleting All Files 1 2 3 Press the D button in playback mode. Use the !" buttons to select [Delete All] and then press the MENU/OK button.
2 3 4 Select [Delete Multi] and then press the MENU/OK button. Select [Sel. Indiv.] or [Sel. Range] and then press the MENU/OK button. Use the !"#$ buttons to select files and then press the MENU/OK button. If you selected [Sel. Range], select only the file that is the starting point of the range. The trash symbol is displayed in the upper left corner of the file. Pressing the ADJ. lever switches between [Sel. Indiv.] and [Sel. Range]. If you selected [Sel. Indiv.], go to step 6.
Setting Protection You can protect files to prevent them from being deleted accidentally. Caution-------------------------------------------------------------------------------------------------------• If you select [Format] in the [Setup] menu, protected images will also be deleted. Setting Protection for One File 1 4 The [Playback] menu appears. Select [Protect] and then press the $ button. Use the !" buttons to select [1 File]. You can change the file with the #$ buttons.
Setting/Canceling Protection for All Files 1 2 Select [Protect] in the [Playback] menu and then press the $ button. Select [Select All] or [Cancel All] and then press the MENU/OK button. Setting Protection for Multiple Files Simultaneously 2 1 Playback Functions 2 3 4 5 86 Select [Protect] in the [Playback] menu and then press the $ button. When in 20-frame or 81-frame view, go to step 3. Select [Sel. Multiple] and then press the MENU/OK button. Select [Sel. Indiv.] or [Sel.
Copying the Images in Internal Memory to a Card You can copy the still images and movies stored in internal memory to a memory card. 1 2 Insert a memory card. Select [Copy to Card from Internal Memory] in the [Playback] menu and then press the $ button. A message appears to indicate processing is being performed, and then the thumbnail view screen reappears when copying is complete.
Trimming Images You can trim the edges of images and then save the images. 1 2 2 3 Display the image to trim in playback mode and then press the MENU/OK button. The [Playback] menu appears. Select [Trim] and then press the $ button. Specify the range to trim. Playback Functions The following operations are possible. 4 X/Y button Changes the trimming size. !"#$ button Moves the trimming frame. ADJ. Lever Changes the aspect ratio of the trimming frame (4:3/3:2/1:1).
Correcting Skewed Images Correct images of rectangular objects such as message boards and business cards shot at an angle so that the images appear as if they were shot from the front. 1 2 The [Playback] menu appears. Select [Skew Correct Mode] and then press the $ button. A message appears to indicate processing is being performed, and then up to five areas recognized as correction targets are indicated by orange frames. If an area could not be detected, an error message appears.
Correcting Brightness and Contrast (Level Compensation) You can correct the brightness and contrast of shot still images. 1 2 2 3 Playback Functions 4 5 6 90 Display the image to correct in playback mode and then press the MENU/OK button. The [Playback] menu appears. Select [Level Compensation] and then press the $ button. Select [Auto] or [Manual] and then press the $ button. The original image is displayed on the top left, and the corrected image on the right.
Examples of Correction------------------------------------------------------------------------------------Adjusting the Overall Brightness • Move the mid-point to the left to increase the overall brightness, and move it to the right to increase the overall darkness. Correcting an Overexposed or Underexposed Image • If the image is overexposed, move the left side point to the right until it lines up with the left edge of the histogram.
Correcting the White Balance You can correct the color tones of still images. 1 2 2 3 Playback Functions 4 Display the image to correct in playback mode and then press the MENU/OK button. The [Playback] menu appears. Select [White Balance Compensation] and then press the $ button. The [White Balance Compensation] screen appears. Use the !"#$ buttons to adjust the positions of the points. To reset the white balance, press the r button. Pressing the r button again cancels correction.
Caution-------------------------------------------------------------------------------------------------------• Some images may not be able to be corrected properly. • If you perform color moire correction, color loss or color bleeding may occur. Developing RAW Files Convert RAW files into JPEG format and then save them as new files. You can configure settings such as the white balance and effect, and then save the files. 1 The [Playback] menu appears.
Note-----------------------------------------------------------------------------------------------------------• The settings that were set at the time of shooting are initially selected. • [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shooting. • For [Dynamic Range Compensation] and [Noise Reduction], select from [Off], [Weak], [Medium], and [Strong].
Caution-------------------------------------------------------------------------------------------------------• The picture display is off while the camera is connected with an AV cable or HDMI cable. • The audio of the video is output from the AV device. Adjust the volume on the AV device. • The white saturation display is off while the camera is connected with an HDMI cable.
Setting DPOF for Multiple Still Images Specify multiple images and the number of copies from thumbnail view. 1 2 Playback Functions 96 2 3 4 Press the Y button in playback mode. The screen changes to 20-frame view. Select [DPOF] in the [Playback] menu and then press the $ button. Use the #$ buttons to select a still image to print and then use the !" buttons to specify the number of copies. A symbol indicating the DPOF setting appears. To cancel the setting, specify [0] for the number of copies.
Selecting the Images to Transfer When using an Eye-Fi card, you can transfer just selected images. 1 2 3 5 6 Turn the power off and then back on. Select [Eye-Fi Transfer Selected Images] in the [Playback] menu and then press the $ button. The screen changes to 20-frame view. Use the #$ buttons to select an image to transfer and then press the MENU/OK button. 2 Playback Functions 4 Set [Eye-Fi Connection Settings] in the [Setup] menu to [On (Selected)]. Press the Fn2 button.
Note-----------------------------------------------------------------------------------------------------------• You can access the screen in step 6 by pressing the Effect button in the single-frame view of the playback mode, and transfer the displayed image.
3 Changing Camera Settings Customizing the Camera You can change the functions of the Fn buttons and ADJ. lever, and register settings to MY1/MY2/MY3 of the mode dial. Registering Shooting Settings (My Settings) You can register the current camera settings as My Settings so that you can easily recall and shoot with the desired settings. Settings can be registered to the following. Register settings to MY1/MY2/MY3 of the mode dial. My Settings BOX Six sets of settings can be registered to the camera.
1 2 3 Set the functions to register. Select [Reg. My Settings] in the [Key Custom Options] menu and then press the $ button. The Reg. My Settings screen appears. Select the location to register the settings and then press the MENU/OK button. If you select [MY1], [MY2], or [MY3], the settings are registered to the mode dial. 3 Changing Camera Settings To save the settings to My Settings BOX, select [My Settings BOX], press the $ button, and select the number to which to register the settings.
Recalling Settings Registered as My Settings The settings registered to [My Settings BOX] can be assigned to MY1/MY2/ MY3 of the mode dial. 1 2 Select [Recall My Settings] in the [Key Custom Options] menu and then press the $ button. The [Recall My Settings] screen appears. Use the !" buttons to select the location on the dial to assign the settings and then press the $ button. 3 Select the My Settings BOX number with the My Settings registered and then press the MENU/OK button.
Shooting Images in My Settings Mode 1 Turn the mode dial to MY1/MY2/MY3. Shooting becomes possible with the settings of My Settings. 3 Changing Camera Settings 2 Symbol for registered shooting mode To temporarily change the shooting mode, select [Switch Shooting Mode] in the [Shooting] menu.
Editing My Settings You can edit the settings registered as My Settings. 1 2 Select [Edit My Settings] in the [Key Custom Options] menu and then press the $ button. The [Edit My Settings] screen appears. Select the My Settings item you want to edit and then press the $ button. 3 Use the !" buttons to select a setting you want to edit and then press the $ button. Use the !" buttons to change the setting. 4 Press the # button to confirm the setting. 5 Press the MENU/OK button.
Changing the Name of a My Settings Item 1 Select [Name] in the screen of step 3 on P. 103 and then press the $ button. The [Name] screen appears and the current name is displayed in the text input area. If you want to specify a new name, go to step 3. 3 Changing Camera Settings 2 3 4 5 104 Text input area Character selection area Use the #$ buttons to move the cursor to the position you want to edit. Press the " button. The cursor moves to the character selection area.
Note-----------------------------------------------------------------------------------------------------------• If the settings of [MY1], [MY2], and [MY3] are assigned in [Recall My Settings] and the settings of My Settings BOX are edited, the changes are also applied to the settings of [MY1], [MY2], and [MY3]. If the settings of [MY1], [MY2], and [MY3] are directly edited, the changes are not applied to the settings of My Settings BOX.
1 2 3 4 3 The [ADJ. Lever Setting] screen appears. Use the !" buttons to select any of [ADJ. Lever Setting 1] to [ADJ. Lever Setting 5] and then press the $ button. Use the !" buttons to select the function to register and then press the # button. Repeat steps 2 and 3. Press the MENU/OK button. The [Key Custom Options] menu reappears. Changing Camera Settings Using ADJ. Mode 1 2 Press the ADJ. lever in shooting mode. The mode becomes ADJ. mode.
Registering Functions to the Fn1/Fn2/Effect Buttons You can register functions to the Fn1/Fn2/Effect buttons so that you can change settings or display a function settings screen by simply pressing a button. Any of the following functions can be registered to each of the Fn1/Fn2/Effect buttons. Function Page — 35 mm Crop P. 50 MultiAF/SpotAF P. 51 MultiAF/PinpointAF P. 51 AF/MF P. 51 AF/Snap P. 51 AF/Subj.Trckng P. 51 JPEG > RAW P. 50 JPEG > RAW+ P. 50 ND Filter P.
1 2 Select [Set Fn1 Button], [Set Fn2 Button], or [Effect Button Setting] in the [Key Custom Options] menu and then press the $ button. Use the !" buttons to select the function to register and then press the # button. The function is registered and the [Key Custom Options] menu reappears.
Changing Other Settings Adjusting the Brightness of the Picture Display You can adjust the brightness of the picture display. 1 2 3 5 Select [AUTO] or [Manual]. If you selected [AUTO], the [Setup] menu reappears. Press the $ button. The [LCD Brightness] screen appears. Use the !" buttons to adjust the brightness. Press the MENU/OK button. The [Setup] menu reappears. 3 Changing Camera Settings 4 Select [LCD Brightness] in the [Setup] menu and then press the $ button.
Setting the Information Displayed in Shooting Mode You can set the information displayed for each number of presses of the DISP. button in shooting mode. 1 2 3 Changing Camera Settings 3 4 5 110 Select [DISP. Button Display Setting] in the [Setup] menu and then press the $ button. The [DISP. Button Display Setting] screen appears. Use the #$ buttons to set [Use DISP. Screen]. O1 to O3 to indicate the number of button presses, and OOff indicates the picture display is off. Use the ADJ.
Setting the Operation Sounds You can set the camera operation sounds in [Operations Sounds] and [Volume Settings] of the [Setup] menu. There are the following three camera operations sounds. Shutter sound The sound played when the shutter release button is pressed. Focus sound The sound played when the shutter release button is half-pressed and the camera is focused on the subject. Warning sound The sound played when an attempt is made to perform an operation that cannot be performed.
Resetting the File Numbers A file name of “R0” and a 6-digit sequential number (010001 to 999999) is assigned to each shot image automatically (R0010001.JPG to R0999999. JPG). Even if you insert a new memory card, the sequential numbering of file names is continued from the last card. To reset the sequential numbers, select [Reset File Number] in the [Setup] menu.
Setting the Copyright Notice You can set a copyright notice to be written as Exif data when images are shot. 1 2 3 The [Copyright notice] screen appears. Press the " button. The cursor moves to the character selection area. Use the !"#$ buttons to select a character and then press the MENU/ OK button. You can enter up to 46 half width alphanumeric characters and symbols. The character type can be changed with the Fn2 button. Press the ADJ. lever.
4 Menus The camera functions are mainly set with the menus. The following menus are available. (The underlined settings are the default settings.) Shooting Menu Use this menu to set the shooting settings. This menu is displayed in shooting mode. The options that can be selected vary depending on the position of the mode dial. 4 Menus 114 Menu option Settings Page Focus Multi AF, Spot AF, Pinpoint AF, Subj. Tracking AF, MF, P. 51 Snap, ∞ (Infinity) Snap focus distance 1 m, 1.5 m, 2 m, 2.
Menu option Settings Page Vivid, Standard, Setting 1, Setting 2 P. 73 Crop to 35 mm Off, On P. 50 Date Imprint Off, Date, Time P. 76 Continuous Mode Off, Continuous P. 62 Auto Bracket Off, AE-BKT 1/3EV, AE-BKT 1/2EV, WB-BKT, WB-BKT P. 63 Preset, Effect-BKT, DR-BKT, CONTRAST-BKT Multiple Exposure Shooting Automatic Exposure: Off, On Save Each Image: Off, On Saving Image: Off, On P. 64 Interval Shooting 00 Min. 01 Sec. to 60 Min. 00 Sec. 1 to ∞ (Infinity) P.
Menu option Menus 116 Page +2.0, +1.7, +1.3, +1.0, +0.7, +0.3, 0.0, -0.3, -0.7, P. 70 -1.0, -1.3, -1.7, -2.0 Manual Flash Amount Full, 1/1.4, 1/2, 1/2.8, 1/4, 1/5.6, 1/8, 1/11, 1/16, 1/22, 1/32, 1/64 P. 71 Flash Synchro Settings 1st Curtain, 2nd Curtain P. 71 Reduce Fluorescent Flicker*1 Off, 50 Hz, 60 Hz P. 77 Switch Shooting Mode*6 5, P, Av, Tv, TAv, M P. 102 Restore Defaults — P.
Playback Menu This menu is displayed in playback mode. Use this menu to manage and correct images. Menu option Page P. 93 Level Compensation P. 90 White Balance Compensation P. 92 Color Moire Correction P. 92 Trim P. 88 Resize P. 87 Skew Correction P. 89 Clip Movie File P. 80 Slide Show P. 81 Protect P. 85 DPOF P. 95 Copy to Card from Internal Memory P. 87 Eye-Fi Transfer Selected Images*1 P.
Key Custom Options Menu Use this menu to register frequently used shooting settings and change the functions of buttons and levers. Menu option 4 Page MY1/MY2/MY3: My Settings Box (1 to 6) P. 99 Recall My Settings — P. 101 Edit My Settings — P. 103 Delete My Settings — P. 105 ADJ. Lever Setting Off, ISO [ADJ. Lever Setting 1], Picture Size [ADJ. Lever P. 105 Setting 2], Aspect Ratio [ADJ. Lever Setting 3], Focus, [ADJ. Lever Setting 4], Image, Expo. Metering [ADJ. Lever Setting 5], Cont.
Menu option Settings Page C-AF Continuous Setting Off, AF Priority, Shutter Priority P. 54 AEL/AFL Lock Keep Setting Off, On P. 54 One Press M Mode Aperture Priority, Shttr Priority, Program P. 42 Restore Defaults [Key Custom Options] — P.
Setup Menu Use this menu to set the general operations of the camera. Menu option 4 Menus 120 Settings Page Format [Card] — P. 25 Format [Internal Memory] — — Reset File Number — P. 112 Change File Name R0 P. 111 Copyright notice — P. 113 LCD Brightness Auto, Manual P. 109 Operation sounds All, Shutter Sounds P. 111 Volume Settings Off, Low, Medium, High P. 111 Auto Power Off Off, 1 to 30 Min. (5 Min.) P. 29 Sleep Mode Off, 1 to 30 Min. P. 29 LCD Auto Dim On, Off P.
Menu option Settings Page Off, 0.5 Sec., 1 Sec., 2 Sec., 3 Sec., Hold P. 33 Grid Guide Display Options Grid 1, Grid 2, Grid 3 P. 110 DISP. Button Display Setting Use DISP. Screen, Graphic Display, Information Display, P. 110 Grid Guide, Level Indicator, Histogram Information Display Mode On, Off P. 42 Fn Button Settings On, Off P. 108 Auto Rotate On, Off P. 37 White Saturation Display On, Off P. 22 One Press Zoom Ratio 4×, 8×, 16× P. 82 Target Zoom Play On, Off P.
5 Downloading Images to Your Computer Using Images on a Computer You can transfer recorded still images and movies to a computer by connecting the camera to the computer with a USB cable. You can also use the SILKYPIX Developer Studio 3.0 LE for PENTAX RICOH IMAGING software supplied with the camera to convert RAW files. The following are the computer system requirements for connecting the camera to the computer and using the supplied software.
Saving Images to PC Use the supplied USB cable to connect the camera to a computer. 1 2 3 4 Open the terminal cover, and connect one end of the USB cable to the USB/ AV OUT terminal on the camera and the other end to the computer. The camera turns on and “Connecting to PC…..” appears on the monitor for 10 sec. The camera is recognized by the computer as a removable disk. The file of the memory card is displayed when the memory card is set.
Installing the Software The supplied CD contains the SILKYPIX Developer Studio 3.0 LE for PENTAX RICOH IMAGING software. You can use SILKYPIX Developer Studio to convert and adjust the color of RAW files and save the file in JPEG or TIFF format.
6 Appendices Trouble Shooting Error messages If an error message is displayed, take the steps listed below. Error message Insert card Set camera clock. File Number Over Limit Unmatched File Protected Card Is Write- Protected. Print settings cannot be set for this file. Insufficient Memory/ Capacity short Format internal memory. Format card. Card Error Page P. 23 P. 30 P. 112 Insufficient memory to store additional files. Delete existing files or use a new card.
Camera Troubleshooting Power Supply Problem The camera does not turn on. The camera turns off during use. 6 Appendices 126 Cause Battery is exhausted or not inserted. Solution Page Correctly insert the battery or charge P. 23 the battery. P. 26 Battery is incompatible. Use a compatible battery. — Battery is not inserted in correct ori- Insert in correct orientation. P. 23 entation. Camera has turned off automatically to Turn the camera back on. P. 28 save power. Battery is exhausted.
Shooting Problem Cause No picture is taken when shut- Battery is exhausted. ter release button is pressed. Camera is off or not in shooting mode. Cannot view photos after shooting. Picture display is blank. Solution Charge the battery. Press POWER button to turn camera on, or press 6 to select shooting mode. Memory card is not formatted. Format card. Memory card is full. Load a new card, or delete unwanted files. Memory card has reached end of work- Insert new card. ing life. Flash is charging.
Problem Photos are too dark. Cause Subject is poorly lit. Picture display is too dark. Colors are unnatural. Camera unable to adjust white balance for shooting conditions using auto white balance. Picture display brightness Ambient lighting is poor or differs from changes during focusing. that used for autofocus. Vertical streaks (“smear”) ap- Subject is bright. pear in photos. Level indicators are not dis- [Level Setting] is set to [Off]. played. Level indicators are hidden.
Miscellaneous Problem Cause Cannot insert memory card. Card is not in correct orientation. Camera controls have no effect. Battery is exhausted. Camera malfunction. Date is incorrect. Date has been reset. Pictures are not displayed on AV device. Solution Insert in correct orientation. Charge the battery. Turn camera off and then on again. Remove and reinsert the battery. Clock is not set correctly. Set clock to correct date and time. Battery was removed.
Specifications Camera Effective pixels Image sensor Lens 6 Appendices 130 Approximately 16.2 million pixels APS-C CMOS (approximately 16.9 million total pixels) Focal length 18.3mm (equivalent to 28 mm on a 35-mm camera) Aperture (f-number) f/2.8 - f/16 Focus range (from Approx. 30 cm to ∞ (from the front edge of the lens) lens) Approx.
Image size (pixels) Still images Movies Recording Media File format Still images Movies Other Major Shooting Functions Other Major Playback Functions External Interface Video Signal Format Power Supply Battery life*4 Dimensions (W × H × D) Weight 6 Appendices Tripod screw hole Date storage time Operating temperature Operating humidity Storage temperature q (16 MB equivalent) 4928 × 3264, 4352 × 3264, 3264 × 3264 r (10 MB equivalent) 3936 × 2608, 3488 × 2608, 2608 × 2608 s (5 MB equivalent) 2912 × 19
AC-U1 USB power adapter Power Supply Output voltage Operating temperature Dimensions (W × H × D) Weight AC 100 - 240 V (50/60 Hz), 0.2 A DC 5.0 V, 1000 mA 10°C to 40°C 42.5 mm × 22 mm × 66.5 mm (excluding Power plug) Approx. 40 g (excluding Power plug) DB-65 rechargeable battery (Lithium-Ion battery) Nominal voltage Rated capacity Operating temperature Dimensions (W × H × D) Weight 6 Appendices 132 3.6V 1250 mAh (Min.), 1275 mAh, (Typ.) 0°C to 40°C 35.3 × 40.3 × 9.4 mm Approx.
Storage Capacity The following table shows the approximate number of images and recording time (in seconds) that can be recorded in the internal memory and onto a memory card in various formats.
Optional Accessories Conversion lens, hood, and adapter Remove the ring cap before attaching a conversion lens (GW-3) or the lens hood and adapter (GH-3). Removal Turn the camera off and rotate the cap counterclockwise until it can be removed. Attachment With the camera turned off, align the marking on the ring cap () with the marking on the camera body (), and turn the ring cap clockwise until it clicks.
External Flash An optional GF-1 TTL flash unit can be connected to the camera hot shoe and used as a TTL auto exposure flash. 1 2 3 4 Close the flash cover. Remove the hot shoe cover from the hot shoe of the camera. Hot Shoe Turn the camera and the optional flash unit off and attach the flash to the camera hot shoe. Turn the flash and camera on.
Other Flash Units 1 2 3 4 Attach the flash unit to the hot shoe. Turn on the camera, turn the mode dial to Av, TAv, or M, and set the aperture. Set the ISO sensitivity to a value other than [Auto] or [AUTO-HI]. Turn on the external flash, set it to Auto, and set the aperture and ISO sensitivity to the same values on the camera.
Using the Camera Abroad Using the AC-U1 USB Power Adapter and BJ-6 Battery Charger These products are for use with currents of 100–240 V and 50 or 60 Hz. Before travelling, purchase a travel adapter for connection to the type of outlets used at your destination. Do not use these products with electrical transformers, as this could damage the camera. Warranty This product was manufactured for use in the country of purchase, and the warranty is not valid in other countries.
Precautions for Use Camera 6 Appendices • This product was manufactured for use in the country of purchase, the warranty is not valid in other countries. Should the product fail or malfunction while out of the country, the manufacturer assumes no responsibility for servicing the product locally or bearing any expenditure incurred thereby. • Do not drop the camera or subject it to physical shocks. When carrying the camera, be careful that it does not strike other objects.
AC-U1 USB Power Adapter • • • • • Use the USB cable contained in the package. Do not subject the power adapter to severe impact or force. Do not use in extreme high or low temperatures or areas subject to vibration. Do not use in an area subject to direct sunlight or high temperature. Unplug the power cord from the power outlet after charging, Otherwise, fire can result.
Camera Care and Storage Caring for the Camera • Photographs can be affected by fingerprints and other foreign matter on the lens. Avoid touching the lens with your fingers. Remove dust or lint with a blower from a camera supply store, or gently clean the lens with a soft, dry cloth. Clean the picture display by wiping it with a soft cloth dampened with a small amount of any monitor cleaner that does not contain organic solvents.
Warranty Policy All PENTAX RICOH IMAGING cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase.
The CE Mark is a Directive conformity mark of the European Union. NOTICES INFORMATION TO THE USER USA FCC Part 15 Class B 6 Appendices 142 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
COMPLIANCE INFORMATION STATEMENT Product Name: DIGITAL CAMERA Model Number: GR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. PENTAX RICOH IMAGING AMERICAS CORPORATION Located at: 633 17th Street, Suite 2600 Denver, Colorado 80202 U.S.A.
Index Numbers 1st Curtain (Flash)......................................... 71 2nd Curtain (Flash)....................................... 71 A ADJ. ISO direct change............................... 46 ADJ. Lever........................................................ 17 ADJ Lever Setting...................................... 105 ADJ. Mode.................................................... 106 AE/AF Target................................................... 56 AEL/AFL Lock Setting.............................
F L FA/Move Target............................................. 56 Flash.................................................................. 69 Flash Exposure Compensation................ 71 Flash On (Flash)............................................. 69 Flash Synchro Settings............................... 71 Fluorescent (White Balance)..................... 59 Fn1/Fn2/Effect Buttons........................... 107 Fn Button Setting Display...................... 108 Focus....................................
O One Press M Mode....................................... 42 Operation Sounds..................................... 111 Optional Accessories................................ 134 Outdoors (White Balance)......................... 59 P Parts of the Camera..................................... 14 Picture Display............................................... 18 Pinpoint AF..................................................... 51 Playback..................................................... 37.81 Playback Menu.....
V Video Format.................................................. 95 Vignetting....................................................... 73 Vivid (Image Settings)................................. 73 Volume Settings......................................... 111 W Warranty....................................................... 137 White Balance................................................ 59 White Balance Bracketing......................... 63 White Balance Correction..........................
PENTAX RICOH IMAGING CO., LTD. 2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.jp) PENTAX RICOH IMAGING FRANCE S.A.S. (European Headquarters) 112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex, FRANCE (HQ - http://www.pentax.eu) (France - http://www.pentax.fr) PENTAX RICOH IMAGING DEUTSCHLAND GmbH Am Kaiserkai 1, 20457 Hamburg, GERMANY (http://www.pentax.de) PENTAX RICOH IMAGING UK LTD. PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U.K. (http://www.pentax.co.
