Scanner User Manual

Specifying a Destination Folder
61
2
H Press [Com.Test].
A connection test starts.
I The test result appears. Press [Exit].
J Press {OK}.
Note
❒ If you change the protocol after entering the path name, user name, or
password, a confirmation message appears.
❒ The connection test may take time.
❒ You can register the destination path in the machine’s address book. For
details, see “Registering Manually-Entered E-mail Address to Address
Book”.
Reference
p.26 “Registering Manually-Entered E-mail Address to Address Book”
Sending Scan Files to an NDS Tree Folder or NetWare Server
This section explains how to specify destinations when sending files to an NDS
tree or NetWare server.
You can send a file to an NDS tree or NetWare server by any of the following
methods:
• Enter the destination path manually
• Specify the destination folder path by browsing