Printer User Guide

216
Monitoring and Configuring the Printer
If you set [SMTP Authentication] to [On], the printer will try logging on using only CRAM MD5. If you set
[SMTP Authentication] to [Off], the printer will try logging on using PLAIN and then LOGIN.
Specifying POP before SMTP
By specifying the SMTP authentication setting, you can send e-mails to destinations where the e-mail server
carries out SMTP authentication.
By using POP before SMTP, you can log on to an SMTP server supporting POP before SMTP.
You can specify whether to use POP before SMTP, and specify the POP server name, POP port number,
POP user name, and POP password.
If you set [POP Authentication Encryption] to [Auto], the printer will try logging on by APOP login, and then
in plain text.
If you set [POP Authentication Encryption] to [On], the printer will try logging on only by APOP login. If you
set [POP Authentication Encryption] to [Off], the printer will try logging on only in plain text.
In standby time following POP authentication (in milliseconds), you can specify how long the printer can
wait for logging on to the SMTP server after logging on to the POP server.
Functions Selectable value Default
SMTP Authentication Enable
Disable
Disable
SMTP Authentication Name 191 characters max. (1-byte al-
phanumerics)
None
SMTP Authentication Password 63 characters max. (1-byte al-
phanumerics)
None (No Password)
SMTP Authentication Encryption Auto
On
Off
Auto
Functions Selectable value Default
POP before SMTP Enable
Disable
Disable
POP Server Name 127 characters max. (1-byte al-
phanumerics)
None
POP Port Number 1-65535 (1-byte numeric char-
acters)
110
POP User Name 127 characters max. (1-byte al-
phanumerics)
None
POP Password 63 characters max. (1-byte al-
phanumerics)
None (no password)
POP Authentication Encryption Auto
On
Off
Auto
Wait Time after POP Authentica-
tion
0-10000 300