Printer User Guide

221
Monitoring and Configuring the Printer
Configure SMB
Configure SNMP
Configure SMTP (Group 1)
Configure SMTP (Group 2)
IP Filter Config – Filter #3 End Address You can specify the IP filter's end address.
Settings Description
SMB You can select whether or not to use the SMB protocol.
Computer Name You can specify the computer name.
Workgroup You can specify the workgroup.
Comment You can enter a comment.
Printing Complete Message You can select whether or not to issue the Printing Complete
message.
Browse Master You can select whether or not to use the Browse Master.
Settings Description
Authentic Community You can specify the SNMP authentic community name.
Trap Community You can specify the SNMP trap community name.
Trap Address (IP) You can specify the IP address of the SNMP trap destination.
SysContact You can specify SysContact.
SysName You can specify SysName.
SysLocation You can specify SysLocation.
Enable Authen Trap You can enable or disable Enable Authen Trap.
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Text in E-mail You can enter a shared comment.
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Settings Description