Operating instructions
Installing Options
17
2
D
DD
D
Remove the seven screws on the cover of the scanner control unit.
E
EE
E
Open the cover of the scanner control unit.
F
FF
F
Connect the connector at the bottom surface of the image-processing unit to
the connector of the scanner control unit, and fix with one accessory screw.
G
GG
G
Check that it is connected tightly, check that there are no foreign objects
such as metal on the scanner control unit.
H
HH
H
Close the scanner control unit cover and fix with seven screws, then insert
the scanner control unit into the main unit.
Note
❒ Be sure to place the scanner on the level surface when inserting the scanner
control unit.
❒ Insert the scanner control unit till you see the screw holes.
ADC064S
ADC011S
ADC012S