Operating instructions

Connecting to the Computer

Note

❒ Press the Hard Reset Switch if you changed the SCSI ID while the power is

ON. ⇒ p.34 “Using the Hard Reset Switch”

Using the Scanner only with the SCSI Connection

You can set the scanner to the SCSI synchronous transmission for high-speed

data transfer and shorten the total scan time. The USB and the optional IEEE1394

connection cannot be used when the SCSI synchronous transmission is set.

Open the cover of the switch box on the lower left of the frontside of the

scanner.

Note

❒ Push the knob of the cover to the left and pull the cover to open.

Set the DIP Switch No.2 to the OFF position.

SCSI synchronous transmission is enabled.

Note

❒ Press the Hard Reset Switch if you changed the DIP Switch while the pow-

er is ON. ⇒ p.34 “Using the Hard Reset Switch”

ADC015S

ADC079S