Operating instructions

Placing Originals
49
4
Placing the Originals in the ADF
The ADF allows you to place multiple originals at one time.
❖
❖❖
❖ Precautions when placing an original in the ADF
• For information about the originals that cannot be placed in the ADF, see
p.47 “Originals that cannot be set in the ADF”.
Important
❒
Attempting to use unsuitable originals in the ADF can lead to a misfeed and
damage to the originals. Place such originals directly on the exposure glass.
• Do not set originals in the ADF in excess of the upper limit mark.
• In case the end of originals are curled too much to feed with the ADF, de-
crease the number of originals or adjust the curled end of originals straight.
• See p.46 “Original Sizes Available for Auto Detection” for information
about the original sizes that can be detected automatically.
•
Fan the originals to get air between the sheets before setting them in the ADF.
A
AA
A
Adjust the stopper of the Output Table to the size of your originals.
1. stopper
Note
❒ Pull out the stopper and insert it to the other way to adjust the position of
the stopper when you are scanning originals shorter than 5.8” × 8.3”L or
4.1” × 5.8”K (A5L or A6K) in longways.
ADC104S
ADC033S