Operating instructions
Placing Originals
51
4
D
DD
D
Place the originals with first page on the top with the face up. Adjust the
side guides to the size of your originals.
1. Side guides
Note
❒ Adjust the original guide carefully by moving the root part of the original
guide located over the original tray ditch.
❒ Be careful not to drop any alien objects such as paper clip, dust, etc. into
the original tray ditch.
❒ Check that the ADF is closed.
E
EE
E
Set the paper thickness changeover lever to your side when you scan the
thick originals — originals thicker than 128g/m
2
(242.5bls).
Note
❒ After scanning, return the switch to the back side.
ADC105S
ADC078S