Technical information

Ricoh Embedded Software Architecture (ESA) Device Client v1.4 Installation and Integration Guide
Appendix A: Setting up HTTPS with Windows 2008
© 2013 by Omtool, Ltd. All rights reserved. Omtool, AccuRoute and the Company logo are trademarks of the Company. Trade names and trademarks of other companies appearing in this document are the property of their respective owners.
A-6
c Open SSL Settings and check the Require SLL option.
d Under client certificates choose Ignore.
12 Change the DNS settings on the device following the instructions below:
13 On the Ricoh device change the following settings under User Tools\System Settings\Interface
Settings.
14 Select DNS configuration and enter the DNS IP address.
15 Select Domain Name and enter the fully qualified domain name for the DNS server.
16 Lastly, push the Ricoh Embedded Software Architecture (ESA) Device Client to the Ricoh device using
the AccuRoute Server Administrator.
Important If Ricoh Embedded Software Architecture (ESA) Device Client is already installed on the
device, it must be uninstalled and then reinstalled to for the changes to be reflected.