User's Manual

Table Of Contents
Message Causes Solutions
"The Digital Signature's
device certificate is not
currently valid. The email
destination(s) which is
registered to the program
cannot be recalled."
The device certificate (PDF
with digital signature) has
expired.
A new device certificate (PDF with
digital signature) must be installed. For
details about how to install a device
certificate (PDF with digital signature),
see Security Guide .
"XXX cannot be YYY
because the Digital
Signature's device certificate
is not currently valid."
(XXX and YYY indicate the
user action.)
The device certificate (PDF
with digital signature) has
expired.
A new device certificate (PDF with
digital signature) must be installed. For
details about how to install a device
certificate (PDF with digital signature),
see Security Guide .
"XXX cannot be YYY
because there is a problem
with the Digital Signature's
device certificate. Check the
device certificate."
(XXX and YYY indicate the
user action.)
There is no device certificate
(PDF with digital signature),
or the certificate is invalid.
A new device certificate (PDF with
digital signature) must be installed. For
details about how to install a device
certificate (PDF with digital signature),
see Security Guide .
"The email destination(s)
which is registered to the
program cannot be recalled
because there is a problem
with the Digital Signature's
device certificate."
There is no device certificate
(PDF with digital signature),
or the certificate is invalid.
A new device certificate (PDF with
digital signature) must be installed. For
details about how to install a device
certificate (PDF with digital signature),
see Security Guide .
If "Check whether there are any network problems." appears, the machine is not correctly
connected to the network or the settings of the machine are not correct. If you do not need to
connect to a network, you can specify the setting so this message is not displayed, and then the
[Check Status] key no longer lights. For details about how to do this, see "Parameter Settings", Fax
. If you reconnect the machine to the network, be sure to set "Display" by configuring the
appropriate User Parameter.
If the paper tray runs out of paper, "Cannot print fax message. Load paper." appears on the
screen, asking you to add paper. If there is paper left in the other trays, you can receive documents
as usual, even if the message appears on the screen. You can turn this function on or off with
"Parameter Settings". For details about how to do this, see "Parameter Settings", Fax .
10. Troubleshooting
182 kir-c4_com_user_guide_gb_00087400_eng.xml
Draft 2012/08/28