User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read the Manuals
- Model-Specific Information
- Names of Major Features
- 1. What You Can Do with This Machine
- Saving Paper
- Converting Documents to Electronic Formats Easily
- Registering Destinations
- Operating the Machine More Effectively
- Customizing the [Home] Screen
- Making Copies Using Various Functions
- Printing Data Using Various Functions
- Utilizing Stored Documents
- Sending and Receiving Faxes without Paper
- Sending and Receiving Faxes via the Internet
- Sending and Receiving Faxes by Using the Machine without Fax Unit Installed
- Using the Facsimile and the Scanner in a Network Environment
- Preventing Information Leakage (Security Functions)
- Monitoring and Setting the Machine Using a Computer
- Preventing Unauthorized Copying
- 2. Getting Started
- Guide to Names and Functions of Components
- Guide to Functions of the Machine's Options
- Guide to the Names and Functions of the Machine's Control Panel
- Changing the Display Language
- How to Use the [Home] Screen
- Registering Functions in a Program
- Turning On/Off the Power
- When the Authentication Screen Is Displayed
- Placing Originals
- 3. Copy
- 4. Fax
- 5. Print
- 6. Scan
- Basic Procedure When Using Scan to Folder
- Basic Procedure for Sending Scan Files by E-mail
- Basic Procedure for Storing Scan Files
- Specifying the File Type
- Specifying Send Settings
- 7. Document Server
- 8. Web Image Monitor
- 9. Adding Paper and Toner
- 10. Troubleshooting
- Indicators
- When an Indicator for the [Check Status] Key Is Lit
- Panel Tone
- When You Have Problems Operating the Machine
- When Messages Are Displayed on the Control Panel
- When Messages Are Displayed on Your Computer Screen
- 11. Appendix
- INDEX
Message Causes Solutions
"Connection with LDAP
server has failed. Check the
server status."
A network error has
occurred and connection
has failed.
• Try the operation again. If the
message is still shown, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings .
"The data could not be sent
because the PC timed out
before it was sent."
A time out occurred when
using WSD Scanner. Time
outs occur when too much
time passes between
scanning an original and
sending its data. The
followings are likely causes
of time outs:
• Too many originals per
set.
• Misfed originals.
• Transmission of other
jobs.
• Reduce the number of originals,
and then scan again.
• Remove any misfed original, and
then scan again.
• Use Scanner Journal to check
there are no jobs awaiting
transmission, and then scan
again.
"Entered protection code for
destination is incorrect.
Please re-enter."
The correct protection code
was not entered.
Make sure the protection code is
correct, and then enter it again. For
details about a protection code, see
"Registering a Protection Code",
Connecting the Machine/ System
Settings .
"Entered user code is not
correct. Please re-enter."
You have entered an
incorrect user code.
Check the authentication settings, and
then enter a correct user code.
When Messages Are Displayed on the Control Panel
kir-c4_com_user_guide_gb_00087400_eng.xml 199
Draft 2012/08/28