User's Manual

Table Of Contents
Item Description
DHCPv6 Select [Enable] to use the DHCPv6 server to automatically configure the
network settings. Select [Disable] to manually configure the network settings.
DDNS Select whether DDNS (Dynamic DNS) name resolution for the network interface
board is active or inactive.
When active, the DNS database is immediately updated.
Details
Item Description
Default Gateway
Address
Enter the default gateway address.
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
DNS Server Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
DHCPv6 Mode Select an operation mode for DHCPv6.
DHCPv6
Operates in DHCPv6 mode.
Obtains the IPv6 address and other parameters.
DHCPv6-lite
Operates in DHCPv6-lite mode.
Obtains parameters except the IPv6 address.
IAID IAID is ID to identity IPv6 address and it is needed for acquiring reserved IPv6
address.
LPR Select to enable network printing using LPR/LPD.
RAW Select to enable network raw printing.
IPP Select to enable network printing using Internet Print Protocol.
Using Web Image Monitor
135