User's Manual

Error and Status Indicate on the Control Panel
Messages on the Screen
• If the "Service Call: SCXXX" appears, contact your sales or service representative.
• Depending on the model you are using, some error messages may not appear.
Message Causes Solutions
Tray 1
Out of Paper
Tray 1 has run out of paper.
Load paper into Tray 1. See page 29
"Loading Paper".
Bypass Tray
Out of Paper
The bypass tray has run out of
paper.
Load paper into the bypass tray. See
page 29 "Loading Paper".
Misfeed: Inner/
Outer
A paper jam has occurred in the
machine.
Remove the jammed paper. See page 150
"Paper Feed Problems".
Misfeed: ADF
Open Cov. Rmv.
Paper
An original has been jammed
inside the ADF.
• Remove jammed originals, and then
place them again. See page 150
"Paper Feed Problems".
• Check the originals are suitable for
scanning. See page 37 "Placing
Originals".
Set Correct Size Ppr
Press Start to Print
The paper for printing fax is not
loaded.
Load the appropriate size paper.
Cover Open
The front cover or fusing cover is
open.
Close the front cover or fusing cover
completely.
Memory Overflow
Press Start or Stop
Memory has reached capacity
during sort copy and duplex.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
Cannot Print Fax
Change Paper Size
An appropriate size paper for
printing faxes is not loaded.
Load A4, Letter or Legal size paper in Tray
1.
10. Troubleshooting
166