User's Manual

Table Of Contents
Placing Originals
This section describes the types of originals you use set and how to place them.
About Originals
Recommended size of originals
Exposure glass
Up to 216 mm (8.5 ") in width, up to 297 mm (11.7 ") in length
ADF
Paper size: 105 to 216 mm (4.1 " to 8.5 ") in width, 127 to 356 mm (5.8 " to 14 ") in length
Paper weight: 60 to 90 g/m
2
(16 to 24 lb.)
Up to 15 sheets of an original can be placed in the ADF at once (when using paper weighing 80
g/m
2
, 21.3 lb.).
Types of originals not supported by the Auto Document Feeder
If placed in the ADF, the following types of originals might be damaged, become jammed, or result in
gray or black lines appearing on prints:
Originals larger or heavier than the recommended amount
Stapled or clipped originals
Perforated or torn originals
Curled, folded, or creased originals
Pasted originals
Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
Originals with perforated lines
Originals with indexes, tags, or other projecting parts
Sticky originals such as translucent paper
Thin, highly flexible originals
Thick originals such as postcards
Bound originals such as books
Transparent originals such as OHP transparencies or translucent paper
Originals that are wet with toner or white out
Placing Originals
37