User's Manual
Table Of Contents
- Operating Instructions
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning Originals
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Utilities
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
Specifying 2 Sided Copying
1. Press the [Copy] key.
CTT124
2. Press the [ ] or [ ] key in the standby mode screen to select [2 Sided Copy], and then
press the [OK] key.
3. Press the [ ] or [ ] key to select [Top to Top] or [Top to Bottom], and then press the [OK]
key.
4. Press the [ ] or [ ] key to select the orientation, and then press the [OK] key.
5. Press the [ ] key to return to the initial screen.
6. Place the original on the exposure glass or in the ADF.
7. To make multiple copies, enter the number of copies using the number keys.
8. Press the [Start] key.
CTT131
When you place the original in the ADF, all the pages are automatically scanned and then only the
pages on one side are copied sequentially. Proceed to Step 10.
When you place the original on the exposure glass, perform the following steps to scan the
subsequent pages.
9. When the current page is scanned, place the next page on the exposure glass, and then
press the [Start] key.
Making 2-sided Copies
59