User's Manual
Table Of Contents
- Operating Instructions
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning Originals
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Utilities
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
If you are using Scan to USB, proceed to Step 4.
2. Using the number keys, enter the number of a registered scan destination.
For details, see page 64 "Registering the Scan Destination".
3. Press the [OK] key.
4. Press the [ ] or [ ] key to select [Density], and then press the [OK] key.
5. Press the [ ] or [ ] key to select the density level, and then press the [OK] key.
6. Press the [ ] key to return to the initial screen.
Specifying Resolution
There are three resolution settings. The higher the resolution, the higher the quality but greater the file
size.
1. Press the [Scanner] key.
CTT128
If you are using Scan to USB, proceed to Step 4.
2. Using the number keys, enter the number of a registered scan destination.
For details, see page 64 "Registering the Scan Destination".
3. Press the [OK] key.
4. Press the [ ] or [ ] key to select [Resolution], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [150 × 150dpi], [300 × 300dpi] or [600 × 600dpi], and
then press the [OK] key.
You can select [600 × 600dpi] only if the original type is set to B&W.
6. Press the [ ] key to return to the initial screen.
5. Scanning Originals
70