User's Manual

A-2
Environments Where the Machine Can be Used
WARNING: R
Do not use flammable sprays or solvents in the vicinity of this machine. Doing so •
could result in fire or electric shock.
Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, •
or containers holding water or any other liquids, on or close to this machine. Fire
or electric shock could result from spillage or if such objects or substances fall
inside this machine.
CAUTION: R
Keep the machine away from humidity and dust. Otherwise a fire or an electric shock •
might occur.
Do not place the machine on an unstable or tilted surface. If it topples over, an injury •
might occur.
Do not place heavy objects on the machine. Doing so can cause the machine to topple •
over, possibly resulting in injury.
Make sure the room where you are using the machine is well ventilated and spacious. •
Good ventilation is especially important when the machine is used heavily.
Keep the machine in an area that is within optimum environmental conditions. Operating •
the machine in an environment that is outside the recommended ranges of humidity and
temperature can cause an electrical fire hazard. Keep the area around the socket free of
dust. Accumulated dust can become an electrical fire hazard.
Do not obstruct the machine’s vents. Doing so risks fire caused by overheated internal •
components.
Keep the machine away from salt-bearing air and corrosive gases. Also, do not install •
the machine in places where chemical reactions are likely (laboratories, etc.), as doing
so will cause the machine to malfunction.
Handling Power Cords and Power Plugs
WARNING: R
Do not use any power sources other than those that match the specifications •
shown in this manual. Doing so could result in fire or electric shock.
Do not use any frequencies other than those that match the specifications shown. •
Doing so could result in fire or electric shock.
Do not use multi-socket adaptors. Doing so could result in fire or electric shock.•
Do not use extension cords. Doing so could result in fire or electric shock.•
Do not use power cords that are damaged, broken, or modified. Also, do not use •
power cords that have been trapped under heavy objects, pulled hard, or bent
severely. Doing so could result in fire or electric shock.
Touching the prongs of the power cable’s plug with anything metallic constitutes •
a fire and electric shock hazard.
The supplied power cord is for use with this machine only. Do not use it with other •
appliances. Doing so could result in fire, electric shock, or injury.