User's Manual

Item Description Value
Use this menu to check the current
default gateway address when DHCP
is used.
IP Address
Method
Displays the IP address acquisition
method.
• IP Not Ready
• DHCP
• Manual Config.
• Default IP
Wifi Direct IP
Address
Displays the IP address of Wi-Fi Direct. –
IPv6 Configuration
Item Description Value
IPv6 Select whether to enable or disable
IPv6.
• Inactive
• Active
Default: [Inactive]
DHCP Sets the machine to receive its IPv6
address from a DHCP server.
• Inactive
• Active
Default: [Active]
IP Address
(DHCP)
Displays the IPv6 address obtained
from a DHCP server.
–
Manual
Config.
Address
Specifies the machine's IPv6 settings. • Manual Config. Address
Specifies the machine's IPv6
address when DHCP is not used.
Can contain up to 46
characters.
For details about entering
characters, see page 35
"Entering Characters".
• Prefix Length
Specifies the prefix length, using
a value between 0 and 128.
• Gateway Address
Network Settings
opal-p3_mf3_com_user_guide_gb_00228505_eng.xml 199
Draft 2016/05/27