User's Manual

Configuring the System Settings

Click [System Settings] to display the page for configuring the system settings.

This page contains the following tabs: [Sound Volume Adjustment] (only SP 221SF, SP 220SFNw, and

SP 221SFNw), [Tray Paper Settings], [Copier], [Fax], [Priority Tray], [Toner Management], [Interface],

and [Shortcut to Function].

Sound Volume Adjustment Tab (only SP 221SF, SP 220SFNw, and SP

221SFNw)

Sound Volume Adjustment

Item Description

Panel Key Sound Select the volume of the beep that sounds when a key is pressed from [Off],

[Low], [Middle], or [High].

On Hook Mode Select the volume of the sound from the speaker during on hook mode from

[Off], [Low], [Middle], or [High].

Job End Tone Select the volume of the beep that sounds when a job is complete from

[Off], [Low], [Middle], or [High].

Job Error Tone Select the volume of the beep that sounds when a fax transmission error

occurs from [Off], [Low], [Middle], or [High].

Alarm Volume Select the volume of the alarm that sounds when an operation error occurs

from [Off], [Low], [Middle], or [High].

Tray Paper Settings Tab

Tray 1

Item Description

Paper Size Select the paper size for tray 1 from the following:

A4 (210 × 297 mm), Letter (8.5 × 11), B5 (182 × 257 mm), B6 (128 ×

182 mm), A5 (210 × 148 mm), A5 (148 x 210 mm), A6 (105 × 148

mm), Legal (8.5 × 14), Foolscap/Folio (8.5 × 13), Indian Legal(8.5 ×

13.6), 16K (195 × 267 mm), Mexican Oficio (8.5 × 13.4), Australian-

FOOLSCAP(8.11 × 13.3), Half Letter-S (5.5 × 8.5), Custom Size

Paper Type Select the paper type for tray 1 from the following:

8. Configuring the Machine Using Utilities

208 opal-p3_mf3_com_user_guide_gb_00228512_eng.xml

Draft 2016/05/27