User's Manual

4. Register information as necessary.
The information you must register are the following items. For details, see page 125 "Specifying
the Scan Settings for Scanning".
• Name
• Destination E-mail Address
• Subject
• File Format
5. Enter the administrator password if required.
6. Click [Apply].
7. Close the web browser.
Preparations for Scan to E-mail are complete.
For details about sending files to the registered destinations, see page 110 "Step 3: Sending Scanned
Files by E-mail".
Step 3: Sending Scanned Files by E-mail
This section explains how to send scanned files to destinations registered in Step 2.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• Register the scan destination in the Address Book using Web Image Monitor. For details, see
page 93 "Registering Scan Destinations".
• When a USB flash memory device is inserted into the machine, scanned documents will be stored
in the USB flash memory device. Confirm that there are no USB flash memory devices inserted into
the machine.
1. Place the original on the exposure glass or in the ADF. To place the original, see page 62
"Placing Originals".
5. Scanning Originals
110 opal-p3_mf3_com_user_guide_gb_00228461_eng.xml
Draft 2016/05/27