User's Manual

Configuring the IPsec Settings

Click [IPsec Settings] to display the page for configuring the IPsec settings.

This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List].

• This function is available only when an administrator password is specified.

IPsec Global Settings Tab

Item Description

IPsec Function Select whether to enable or disable IPsec.

Default Policy Select whether to allow for the default IPsec policy.

Broadcast and

Multicast Bypass

Select the services that you do not want to apply IPsec from the following:

[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]

All ICMP Bypass Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the

following:

[Active]: All ICMP packets will be bypassed without IPsec protection.

"ping" command (echo request and echo reply) is not encapsulated by

IPsec.

[Inactive]: Some ICMP message types will be bypassed without IPsec

protection.

• For details about which ICMP message types will be bypassed when setting [All ICMP Bypass] to

[Inactive], see Web Image Monitor Help.

IPsec Policy List Tab

Item Description

Name Displays the name of the IPsec policy.

Address Settings Displays the IP address filter of the IPsec policy as below:

Remote address/Prefix length

Configuring the IPsec Settings

opal-p3_mf3_com_user_guide_gb_00228515_eng.xml 223

Draft 2016/05/27