User's Manual

Error and Status Messages Appear on Smart
Organizing Monitor
"X" represents a displayed message that varies according to the situation.
Message Causes Solutions
No Response from
I/O Device
Check the cable,
power cord, and
main switch.
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
Tray Not Detected or
No Paper
The indicated paper
source tray is not set
properly, or no
paper loaded.
Check the indicated
tray.
• Tray 1 has run out of
paper.
• The bypass tray has run out
of paper.
• Load paper into Tray 1. See page 41
"Loading Paper".
• Load paper into the bypass tray. See
page 41 "Loading Paper".
Paper Misfeed X A paper jam has occurred in the
machine.
Remove the jammed paper. See
page 273 "Clearing Misfeeds" and
page 280 "Paper Feed Problems".
Print Cartridge is
near empty.
The print cartridge is almost
empty.
Prepare a new print cartridge.
No Toner
Toner has almost run
out.
Shortly printing
becomes not
available. Please
keep Print Cartridge
handy.
The machine has run out of the
toner.
Replace the print cartridge. See page 253
"Replacing the Print Cartridge".
Printing has been
interrupted because
The data is too large or
complex to print.
Select [600 x 600 dpi] in [Resolution] to
reduce the size of data. For details, see the
printer driver Help.
Error and Status Messages Appear on Smart Organizing Monitor
opal-p3_mf3_com_user_guide_gb_00228532_eng.xml 271
Draft 2016/05/27