User's Manual

Clearing Misfeeds
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
• The jammed paper may be ejected automatically when opening and then closing the front cover or
when turning the power off and then back on.
Removing Jammed Paper from Tray 1
1. Pull Tray 1 halfway out, and check for jammed paper. If there is jammed paper, remove it
carefully.
DCT012
2. Carefully slide Tray 1 back in until it stops.
3. Open the front cover, and then carefully lower it.
DCT027
Clearing Misfeeds
opal-p3_mf3_com_user_guide_gb_00228533_eng.xml 273
Draft 2016/05/27