User's Manual

• When you specify a scan destination, the machine's scan settings change automatically according
to the information registered for that destination in the Address Book. If necessary, you can change
the scan settings using the control panel. For details, see page 125 "Specifying the Scan Settings
for Scanning".
• The [Pause/Redial] key is not effective for the first scan job after the machine is turned on.
• To select destinations not registered as Quick Dial entries, use the [Address Book] key. For
specifying destinations using the [Address Book] key, see page 101 "Basic Operation of Scan to
Folder".
Specifying the Scan Destination Using the One Touch Buttons or [Pause/Redial] Key (only SP 221SF, SP 220SFNw, and SP
221SFNw)
opal-p3_mf3_com_user_guide_gb_00228468_eng.xml 117
Draft 2016/05/27