User's Manual

Basic Procedure for Saving Scan Files on a

USB Flash Memory Device

This sections explains basic operations of Scan to USB. Files are saved to the USB flash memory device

inserted into the machine.

• The original in the ADF takes precedence over the original on the exposure glass if you place

originals both in the ADF and on the exposure glass.

• This machine does not support the use of external USB hubs.

• Not all types of USB flash memory devices are supported.

• When using Scan to USB, set [Save Scn Data to USB] to [Active]. For details, see page 189

"Administrator Settings".

1. Insert the USB flash memory device into the USB port.

DCT039

2. Press the [Scanner] key.

DSH149

A message indicating the machine is reading the device appears. Wait until [Save Scn Data to

USB] appears on the display. The time before the message appears differs depending on the type

of USB flash memory device.

5. Scanning Originals

118 opal-p3_mf3_com_user_guide_gb_00228469_eng.xml

Draft 2016/05/27