User's Manual

Problem Solution
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
When You Cannot Make Copies as Wanted
Problem Solution
Photocopied pages are not in
correct order.
On the control panel, change the [Sort] setting under [Copier
Features] to collate pages as you require. For details about
[Sort], see page 168 "Copier Features Settings".
Copied pages are too dark or too
light.
Adjust the image density. See page 89 "Specifying the Scan
Settings for Copying".
Copier Problems
opal-p3_mf3_com_user_guide_gb_00228538_eng.xml 289
Draft 2016/05/27