User's Manual

Error Code Solution
• There was a paper jam. Remove the jammed paper. See
page 273 "Clearing Misfeeds" and page 280 "Paper
Feed Problems".
• A print cartridge was empty. Replace the print cartridge.
See page 253 "Replacing the Print Cartridge".
• The received fax was too large. Ask the sender to re-send
the document in parts as several smaller individual faxes,
or to send at a lower resolution.
2XXX32 to 2XXX84 An error occurred while receiving a fax.
• Confirm that the telephone line is properly connected to
the machine.
• Disconnect the telephone line from the machine, and
connect a standard telephone in its place. Confirm that
you can make calls using the telephone. If you cannot
make calls this way, contact your telephone company.
• If the problem persists, contact your sales or service
representative.
10. Troubleshooting
294 opal-p3_mf3_com_user_guide_gb_00228540_eng.xml
Draft 2016/05/27