User's Manual

3. Pick up the handset.
4. Specify the destination using the external telephone.
5. Specify the destination using the external telephone or the machine's number keys if using
the handset.
6. When the other party answers, ask them to press their fax start button.
7. If you hear a high pitched tone, press the [Start] key.
DSH147
If [Operation] is set to [Easy Mode], proceed to Step 8.
8. Press [TX], and then press the [Start] key.
9. Replace the handset.
• For details about [Operation], see page 176 "Fax Features Settings".
Specifying the Scan Settings for Faxing
Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
6. Sending and Receiving a Fax
148 opal-p3_mf3_com_user_guide_gb_00228483_eng.xml
Draft 2016/05/27