User's Manual

1. Press the [User Tools] key.
DSH142
2. Press the [ ] or [ ] key to select [Fax Features], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Reception Settings], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Switch Reception Mode], and then press the [OK] key.
5. Press the [ ], [ ], [ ], or [ ] key to select the desired reception mode, and then press the
[OK] key.
6. Press the [User Tools] key to return to the initial screen.
• In FAX/TAD mode, the machine automatically starts to receive faxes after the external telephone
answering device rings the number of times specified in [Total No. of Rings (TAD)] under [Fax
Features]. Make sure to set the external telephone answering device to answer calls before the
machine starts to receive faxes. For [Total No. of Rings (TAD)], see page 176 "Fax Features
Settings".
Receiving a fax in FAX/TEL Manual mode
• The procedure differs depending on whether [Operation] is set to [Easy Mode] or [Advanced
Mode] in [Fax Features].
• To receive faxes, be sure to first remove any originals loaded in the ADF.
1. Pick up the handset to answer the call.
A normal telephone call starts.
2. When you hear a fax calling tone or no sound, press the [Facsimile] key, and then press
the [Start] key.
If [Operation] is set to [Easy Mode], proceed to Step 5.
3. Press [RX].
4. Press the [Start] key.
6. Sending and Receiving a Fax
158 opal-p3_mf3_com_user_guide_gb_00228488_eng.xml
Draft 2016/05/27