User's Manual

Item Description Value
Energy Saver
Mode
Sets the machine to enter
Energy Saver mode, Energy
Saver mode 1 or Energy
Saver mode 2, to reduce
power consumption. The
machine recovers from
Energy Saver mode when it
receives a print job, prints a
received fax, or when the
[Copy] or [Start] key is
pressed.
• EnergySaverMode 1
The machine enters Energy Saver mode 1 if
the machine has been idle for about 30
seconds. It takes less time to recover from
Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power
consumption is higher in Energy Saver mode 1
than in Energy Saver mode 2.
Default: [Off]
• Off
• On
• EnergySaverMode 2
The machine enters Energy Saver mode 2
after the period of time specified for this setting
is passed. The machine consumes less power
in Energy Saver mode 2 than in Energy Saver
mode 1, but it takes longer to recover from
Energy Saver mode 2 than from Energy Saver
mode 1.
• On (1 to 240 minutes)
• 30sec.
• Off
Default: [30sec.]
• Europe
• On (1 to 20 minutes)
• 30sec.
• Off
• Countries other than European countries
• On (1 to 240 minutes)
• 30sec.
• Off
Language Specifies the language used
on the screen and in reports.
The default value for this
setting is the language you
• English
• German
• French
Administrator Settings
opal-p3_mf3_com_user_guide_gb_00228503_eng.xml 191
Draft 2016/05/27