User's Manual

Item Description Value
Current
Connection
Displays detailed information about
the connection, such as the SSID and
the wireless signal strength.
–
Input SSID Displays the procedure for manually
connecting to a wireless LAN. It leads
you step-by-step through configuring
the settings for connecting with a
wireless LAN.
–
WPS Connects with one touch using WPS
(Wi-Fi Protected Setup). For details,
see Wi-Fi Settings Guide.
• PBC
• PIN
WiFi Direct Enables devices to communicate
directly with each other without using a
central access point.
–
IPv4 Configuration
Item Description Value
DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
• Inactive
• Active
Default: [Active]
IP Address Specifies the machine's IPv4 address
when DHCP is not used.
Use this menu to check the current IP
address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Subnet Mask Specifies the machine's subnet mask
when DHCP is not used.
Use this menu to check the current
subnet mask when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Gateway
Address
Specifies the machine's default
gateway address when DHCP is not
used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
7. Configuring the Machine Using the Control Panel
198 opal-p3_mf3_com_user_guide_gb_00228505_eng.xml
Draft 2016/05/27