User's Manual
Table Of Contents
- Operating Instructions
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning Originals
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (LAN-Fax)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Utilities
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].
Administrator Tab
Administrator Settings
Item Description
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
Rest Settings Tab
Reset Settings
Item Description
Reset Network Settings Select to restore the following settings to their defaults:
•
Settings under [Network Settings]
• Settings under the [Administrator] tab of [Administrator Tools]
Reset Menu Settings Select to restore the settings other than the following to their defaults:
• Network settings
• Scan destinations
• User restriction settings
• Fax destinations
• IPsec settings
• [Printer Registration], [Low Humidity Mode], and [Image Density]
settings under system settings of the control panel setting menu
Clear Scan Destination Select to clear the scan destinations.
Clear Address Book Select to clear the fax destinations.
Reset IPsec Settings Select to clear the IPsec settings.
Configuring the Administrator Settings
197