User's Manual
Table Of Contents
- Operating Instructions
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning Originals
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (LAN-Fax)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Utilities
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
• [Reset IPsec Settings] appears only when the administrator password is specified.
Backup Setting Tab
• When sending the machine for repair, it is important that you create backup files in advance. The
machine's settings are returned to the default after repair.
Backup Setting
Item Description
Back up Network
Settings
Backs up the following settings to a file:
•
Settings under [Network Settings]
• Settings under the [Administrator] tab of [Administrator Tools]
Note that, however, [Max. E-mail Size] setting under [Network
Application] will not be backed up here; it will be backed up by [Back up
Menu Settings] instead.
Back up Menu Settings Backs up the settings other than the following to a file:
•
Network settings
• Scan destinations
• User restriction settings
• Fax destinations
• IPsec settings
• [Printer Registration], [Low Humidity Mode], and [Image Density]
settings under system settings of the control panel setting menu
Back up Scan
Destination
Backs up scan destinations to a file.
Back up Address Book Backs up fax destinations to a file.
Back up IPsec Settings Backs up the IPsec settings to a file.
Follow the procedure below to create configuration backup files.
1. Select the radio button for the type of data you wish to back up.
2. Enter the administrator password if required.
3. Click [OK].
8. Configuring the Machine Using Utilities
198