User's Manual
• You can search Scan to E-mail destinations from the LDAP server (not Scan to FTP or Scan to Folder
destinations).
1. Press the [Scanner] key.
CES175
2. Press the [Address Book] key.
CES180
3. Press the [ ][ ] keys to select [Search LDAP], and then press the [OK] key.
4. Press the [ ][ ] keys to select [LDAP Search], and then press the [OK] key.
A list of addresses that match the search conditions appears on the display.
5. Press the [ ][ ] keys to scroll through the search result, and then press [ ] to select the
desired destination.
You can select multiple destinations. A check mark will appear for the selected destinations. To
deselect a destination, press [ ] again.
• The search result will contain destinations that match the predefined search conditions.
• For details about registering LDAP servers, see p.444 "Programming the LDAP server".
• For details about specifying the search conditions, see p.450 "Specifying the LDAP Address
Search Conditions".
Scanning Using the Control Panel
rinmei-mf2_com_user_guide_gb_00059731_eng.xml 187
5
操作部イラストは現状
PerMF3のままです
操作部イラストは現状
PerMF3のままです
Draft 2011/08/29