User's Manual
• For details about registering LDAP servers, see p.444 "Programming the LDAP server".
• For details about specifying the search conditions, see p.450 "Specifying the LDAP Address
Search Conditions".
Specifying the destination using the broadcast function
You can send a fax to multiple destinations simultaneously. You can broadcast faxes to a maximum of
100 destinations (including both normal fax destinations and Internet Fax destinations).
Faxes are sent to destinations in the order they were specified.
1. Press the [Facsimile] key.
CES176
2. Add a destination by using one of the following methods:
• To add a Quick Dial destination: press a corresponding One Touch button.
• To add a Speed Dial destination: press the [Address Book] key, select [Search Address
Book], select a destination, and then press the [OK] key.
• To add a manually-specified destination: confirm that [No.key] is pressed, and then enter the
destination fax number using the number keys.
• To add a destination from an LDAP server: follow the procedure in "Specifying the destination
from an LDAP server".
3. Press the [OK] key.
Press [List] to see the list of destinations that have been added so far.
Go back to step 2 to add further destinations.
• While specifying multiple destinations, you can press the [Clear/Stop] key to clear all destinations.
• If you specify multiple destinations in Immediate Transmission mode, the mode switches to Memory
Transmission mode temporarily.
6. Using the Fax Function
220 rinmei-mf2_com_user_guide_gb_00059755_eng.xml
6
操作部イラストは現状
PerMF3のままです
LDAPのあて先を追加する手順は別
途確認し、必要があれば修正します
No.107【同報送信】(FWv0.24)
『PRO2FAXFunctionalSpecforInternetFAXv1.00』「2.3.
Broadcasting」
アナログファクスとI-FAXの同報送信が可能で、同報送信時は
I-FAX(一括)→アナログファクス(順番)に送信されると記述され
ていますが、FWv0.24の実機ではアナログファクスのあて先と
I-FAXのあて先を同時に指定できない模様でした。
これは現時点の実装の問題でしょうか。
Draft 2011/08/29