User's Manual

• Group data cannot be exported or imported.
• Up to 1000 destinations can be registered in the LAN-Fax Address Book. If this limit is exceeded
during importing, the remaining destinations will not be imported.
Basic Operation for Sending Faxes from a Computer
This section describes the basic operation for sending faxes from a computer.
You can select the destination from the LAN-Fax Address Book or enter the fax number directly. You can
send faxes to up to 100 destinations at one time.
• Before sending a fax, the machine stores all the fax data in memory. If the machine's memory
becomes full while storing this data, the fax transmission will be canceled. If this happens, lower the
resolution or reduce the number of pages and try again.
• The following procedure is based on Windows 7 as an example. If you are using another
operating system, the procedure might vary slightly.
1. Open the file you want to send.
2. On the [File] menu, click [Print...].
3. Select the LAN-Fax driver as the printer, and then click [Print].
If necessary, configure the transmission settings in the LAN-Fax driver's properties before clicking
[Print].
4. To specify a destination from the LAN-Fax Address Book, select a destination from [User
List:], and then click [Add to List].
Repeat this step to add more destinations.
5. To directly enter a fax number, click the [Specify Destination] tab, enter a fax number (up
to 40 digits) in [Fax Number:], and then click [Add to List].
Repeat this step to add more destinations.
6. Using the Fax Function
234 rinmei-mf2_com_user_guide_gb_00059769_eng.xml
6
PerMF3のドライバー画面です。
後日差し替えます。
No.99【PCファクス送信時のエラー】（FW
v0.24、PCファクスv0.05.0.0）
PCファクスの送信操作をしたところ、ドライバー
から"Writeticketfilefailure"というポップアップが
出て操作が完了できませんでした（LDAP認証もユ
ーザー機能制限もかけていない状況です）。これ
は、FWまたはドライバーの現段階の実装の問題で
しょうか。
Draft 2011/08/29