User's Manual

7. [Copy] key

Press to switch to copier mode. The key stays lit while the machine is in copier mode.

8. [Short Cut] key

Press to use the function pre-assigned for this key. Depending on the setting, one of the following functions can

be used by one-touch:

• Activate ID card copy mode for the current job

• Enter the [Print Received File] menu under fax feature settings

• Enter the [Immediate TX] menu under fax transmission settings

• Open the scanner Address Book (for Scan to E-mail/FTP/Folder)

• Enter the combined/2-sided copy menu for the current job

9. Screen

Displays current status and messages.

10. Scroll keys

Press to move the cursor in the directions indicated by each scroll key.

Pressing the [ ][ ] keys while the machine is in standby mode will display the menu for configuring the settings

of the machine's current operation mode (copier, scanner, or fax).

11. Number keys

Use to enter numerical values when specifying settings such as fax numbers and copy quantities, or enter

letters when specifying names.

12. [Clear/Stop] key

• While the machine is processing a job: press to cancel the current job.

• While configuring the machine: press to cancel the current setting and return to standby mode.

• While in standby mode: press to cancel temporary settings such as image density or resolution.

13. [Start] key

Press to scan, copy, or send a fax.

14. [OK] key

Press to confirm settings or enter the next level of the menu tree.

15. [Escape] key

Press to cancel the last operation or exit to the previous level of the menu tree.

16. Selection keys

Press the key that corresponds to an item shown on the bottom line of the screen to select it.

17. [Facsimile] key

Press to switch to fax mode. The key stays lit while the machine is in fax mode.

18. [Scanner] key

Press to switch to scanner mode. The key stays lit while the machine is in scanner mode.

19. [Density] key

Press to adjust image density for the current job.

1. Guide to the Machine

40 rinmei-mf2_com_user_guide_gb_00059615_eng.xml

削除［ColorStart］

Draft 2011/08/29