User's Manual

Item Description
Duplex supported size None
Notes • The number of sheets that can be printed in one minute is
approximately half that of plain paper.
• When using 135 g/m
2
(35.9 lb.) or heavier paper, prints may be
output with strong curls.
• When using 135 g/m
2
(35.9 lb.) or heavier paper, take prints from
the output tray frequently.
• Paper thicker than 160 g/m
2
cannot be printed onto.
Label paper
Item Description
Paper thickness 105 to 160 g/m
2
(28.0 to 42.6 lb.)
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes • The number of sheets that can be printed in one minute is
approximately half that of plain paper.
• Avoid using adhesive label paper on which glue is exposed. Glue
may stick to the inner parts of the machine, which can cause paper
feed problems, deterioration in print quality, or premature wear of the
print cartridge's photo conductor unit.
OHP transparencies
Item Description
Supported paper tray Bypass tray
Duplex supported size None
2. Getting Started
90 rinmei-mf2_com_user_guide_gb_00059650_eng.xml
2
No.8
①ラベル紙厚はMF1ではマニュアルで打ち出しなしで
したが、今回は「105to160g/m2(28.0-42.6)」でよい
でしょうか。
②ラベル紙の紙厚を打ち出す場合、"105-160"範囲外の
ラベル紙を使用する場合の注意（使用不可、別の紙種
で設定する）などはあるか？
Draft 2011/08/29