User's Manual

Removing paper tray jam (bypass tray jam)

If "Misfeed: Paper Tray" appears on the display, follow the procedure below to remove it.

• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a

hot surface).

• Some of this machine's internal components get very hot. For this reason, take care when

removing misfed paper. Not doing so could result in burns.

1. If paper is jammed in the bypass tray input area, remove the jammed paper carefully.

CMF073

2. Close the bypass tray.

3. Push the side button to open the front cover, and then carefully lower it.

CMF068

Paper Feed Problems

rinmei-mf2_com_user_guide_gb_00059883_eng.xml 371

用紙が手差しでジャムって

いる状態に次回修正予定

Draft 2011/08/29